> How/Where is the setup for the IPv6?
>
> Shaun
If you have recent tree or Freebsd4.0 RC3, then there will be
IPv6 specific configuration examples in /etc/defaults/rc.conf.
The lines which start from "ipv6_..." are them.
At least you need to set ipv6_enable to YES.
You need to add the follwing line into /etc/rc.conf.
ipv6_enable="YES"
If you want to use your machine as IPv6 router, then you need
to assigne your interfaces IPv6 prefix (like IPv4 subnet).
Typical configurations will be,
ipv6_gateway_enable="YES" # Set to YES if this host will be a gateway.
ipv6_router_enable="YES" # Set to YES to enable an IPv6 routing daemon.
ipv6_router_flags="-l" # Flags to IPv6 routing daemon.
Also, if your router has ed0 and ep0, and you want to assigne
IPv6 site local prefixes fec0:0000:0000:0001::/64 and
fec0:0000:0000:0003::/64, then following additions will be enough.
ipv6_network_interfaces="ed0 ep0"
ipv6_prefix_ed0=fec0:0000:0000:0001
ipv6_prefix_ep0=fec0:0000:0000:0003
Cheers,
Yoshinobu Inoue
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
