I don't recall reports of trouble with recent CURRENT, but my CVSup
from yesterday afternoon is panicing. Before I try too debug this, has
anyone been getting these or knows what I might be missing?
Boot messages and the panic info are attached.
--
Crist J. Clark [EMAIL PROTECTED]
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Sun Feb 4 20:09:00 PST 2001
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/BUBBLES
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (132.96-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52b Stepping = 11
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 30130176 (29424K bytes)
Preloaded elf kernel "kernel" at 0xc02a9000.
Intel Pentium detected, installing workaround for F00F bug
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.1, connected at v1.1
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <display, VGA> at 8.0 (no driver attached)
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc1: cannot reserve I/O port range
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2 at port 0x3e8-0x3ef irq 5 on isa0
sio2: type 16550A
ep0: <3Com 3C509-TP EtherLink III> at port 0x300-0x30f irq 10 on isa0
ep0: Ethernet address 00:20:af:17:a3:e9
unknown: <PNP0700> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0680> can't assign resources
IP packet filtering initialized, divert enabled, rule-based forwarding disabled,
default to deny, logging limited to 1000 packets/entry by default
ad0: 1222MB <QUANTUM FIREBALL1280A> [2484/16/63] at ata0-master BIOSPIO
acd0: CDROM <CD-532E-A> at ata0-slave using BIOSPIO
Mounting root from ufs:/dev/ad0s1a
kernel trap 12 with interrupts disabled
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xe
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc01f2553
stack pointer = 0x10:0xc3a2bf50
frame pointer = 0x10:0xc3a2bf64
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = resume, IOPL = 0
current process = 16 (irq14: ata0)
trap number = 12
panic: page fault
syncing disks...
done
Uptime: 0s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot <--
# $Id: BUBBLES,v 1.4 2001/02/04 06:49:24 cjc Exp cjc $
#
# BUBBLES - 2000/11/11, cjc
#
# Kernel configuration for IBM Pentium 133
#
# 2000/12/09, cjc - DEVEL became BUBBLES
#
machine i386
cpu I586_CPU
ident BUBBLES
maxusers 32
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
#options DEVFS #Device Filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options UCONSOLE #Allow users to grab the console
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
#options KBD_INSTALL_CDEV # install a CDEV entry in /dev
device isa
device pci
#options COMPAT_OLDISA # compatability shims for lnc, le
#options COMPAT_OLDPCI # compatability shims for lnc
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
#options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# atkbdc0 controls both the keyboard and the PS/2 mouse
#device atkbdc 1 # At keyboard controller
#device atkbd # at keyboard
#device psm # psm mouse
#device vga # VGA screen
# splash screen/screen saver
#device splash
# syscons is the default console driver, resembling an SCO console
#device sc 1
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
device apm
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# ISA Ethernet NICs. pccard nics included.
device ep # Etherlink III based cards
# Pseudo devices - the number indicates how many units to allocated.
device random # Entropy device
#options NOBLOCKRANDOM # avoid any blocking on device random
device loop # Network loopback
device ether # Ethernet support
#device sl # Kernel SLIP
#device ppp 1 # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
#device md # Memory "disks"
device gif 4 # IPv6 and IPv4 tunneling
device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# Needed for ipfwlogd development
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #print information about
options IPFIREWALL_EXTRA_VERBOSE #print TCP flag information
options IPFIREWALL_VERBOSE_LIMIT=1000 #limit verbosity
options IPDIVERT #divert sockets
#End
