The latest smartpqi drivers for FreeBSD can also be found here. https://storage.microsemi.com/en-us/speed/raid/aac/unix/smartpqi_freebsd_v1.0.3-2323_tgz.php
These will work with the HPE Gen10 Smart Array controllers as well. Scott -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Toshaan Bharvani | VanTosh Sent: Wednesday, September 18, 2019 4:50 AM To: [email protected] Subject: Re: HPE DL 160 Gen 10 + E208i-a External E-Mail Julien, On 18/09/2019 10:57, Julien Cigar wrote: > Hello, > > I'm wondering if any of you has successfully installed FreeBSD (12) on > a DL 160 Gen 10, is it well supported? Yes, well, I have on a DL360 gen10, it is the 2U rack version, with a different RAID controller, see lower. > > I plan to get a model with an "HPE Smart Array E208i-a SR Gen10 > controller", from what I can read in the documentation it doesn't have > any BBU and can be configured in HBA + pass-through mode (could > someone confirm ?) so it should be suitable for ZFS, right? Well, so I have experience with the P4xx series on FreeBSD, I have installed it successfully on Gen6, Gen8, and Gen10. The Linux Driver for RHEL from HPE suggest that the HPE E208 is a newer HPE Microsemi Controller, using the smartpqi drivers. FreeBSD has support for the smartpqi driver https://www.freebsd.org/cgi/man.cgi?query=smartpqi&sektion=4&manpath=freebsd-release-ports So I would say the HPE E208 should work under FreeBSD 12. > > Thanks! > > Julien > > Regards, Toshaan. -- -- Toshaan Bharvani +32-(0)476-66.70.55 [email protected] @toshywoshy -- _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[email protected]" _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[email protected]"
