After installing mpd-3.10 and using in mpd.conf: set iface mtu 1400 XP works fine and fast.
There is no some tuning on the WinXP client I was make. Many thanks for all. Dmitry. ----- Original Message ----- From: "Julian Elischer" <[EMAIL PROTECTED]> To: "Dmitry A. Bondareff" <[EMAIL PROTECTED]> Cc: "Archie Cobbs" <[EMAIL PROTECTED]>; "Johan Larsson" <[EMAIL PROTECTED]>; "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> Sent: Tuesday, November 05, 2002 12:21 PM Subject: Re: Win XP with mpd > > > On Tue, 5 Nov 2002, Dmitry A. Bondareff wrote: > > > I'll trying to setup mtu to 1400, why I don't see it by ifconfig command ? > > > > From mpd.conf: > > .... > > set link mru 1400 > > set link mtu 1400 > > > the link commands affect the links.. > this sets teh fragment size that Mulitlink ppp will use.. > externally you only see teh interface mtu, which is > a different thing.. > try: > > set iface mtu 1400 > > > > .... > > > > #mpd -b > > > > #ifconfig -a: > > ng0: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500 > > ng1: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500 > > ng2: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500 > > ng3: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500 > > ng4: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500 > > > > After connecting: > > #ifconfig -a: > > ng0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> mtu 1500 > > inet 1.1.1.1 --> 10.0.2.1 netmask 0xffffffff > > ng1: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500 > > ng2: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500 > > ng3: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500 > > ng4: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500 > > > > After disconnected: > > #ifconfig -a: > > ng0: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1496 > > ng1: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500 > > ng2: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500 > > ng3: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500 > > ng4: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500 > > > > > > > > ----- Original Message ----- > > From: "Archie Cobbs" <[EMAIL PROTECTED]> > > To: "Johan Larsson" <[EMAIL PROTECTED]> > > Cc: "Archie Cobbs" <[EMAIL PROTECTED]>; "Dmitry A. Bondareff" > > <[EMAIL PROTECTED]>; "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> > > Sent: Tuesday, November 05, 2002 12:04 AM > > Subject: Re: Win XP with mpd > > > > > > > Johan Larsson writes: > > > > > > For a long time many peoples discussed why Win XP don't work with > > mpd. > > > > > > May be you can help us ?? > > > > > > Where I can find working configs ?? > > > > > > > > > > I've heard of some MTU problems, some of which mpd-3.10 should > > address. > > > > > > > > It might be MTU problems. But the problem occurs for example when i ping > > > > the server from the windows xp machine, some pings get lost, some times > > > > you must issue the ping command a few times, or run it with -t for a > > while > > > > to see them get lost. mpd-3.10 does not solve this problem > > unfortunately. > > > > > > Try playing with the "set link mtu" and/or "set iface mtu" commands > > > to manually set the MTU values. > > > > > > > I might be able to fix some dumps (from ethereal) under windows xp if > > you > > > > want it. And of course, these pings getting lost is just an easy way of > > > > seeing the problem, you also get poor performance obviously. > > > > > > If you can tell where the packets are being dropped, that would be useful > > > to know. > > > > > > -Archie > > > > > > __________________________________________________________________________ > > > Archie Cobbs * Packet Design * http://www.packetdesign.com > > > > > > To Unsubscribe: send mail to [EMAIL PROTECTED] > > > with "unsubscribe freebsd-net" in the body of the message > > > > > > > > > To Unsubscribe: send mail to [EMAIL PROTECTED] > > with "unsubscribe freebsd-net" in the body of the message > > > > > To Unsubscribe: send mail to [EMAIL PROTECTED] > with "unsubscribe freebsd-net" in the body of the message > To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-net" in the body of the message