On Wed, Jul 05, 2006 at 08:02:55PM -0500, Derrick T. Woolworth wrote: > Sorry for cross-posting, but these issues seem relevant for lists...
That's okay, I am not on all and I'll create some bounces, I am sure. > Has anyone had success with SATA300 controllers with FreeBSD 6.1? > I've been trying Promise and nVidia nForce4 and I'm not having any > luck. Using a MSI K8NGM2-L motherboard and others, but 6.1's > installation hangs as soon as it sees ad4. I've also tried using an > Adaptec 1210SA controller and had zero results. I've read that the > chipset on this controller is not very good - forces serialized > access to the controller's channels??? Nevertheless, I've got a K8N > Diamond motherboard on a workstation and I was able to at least > "start" the 6.1 installation. I have no idea if its stable. At > this point, I'd settle for just knowing "which" SATA300 controller > to use that will work successfully and "well" with FreeBSD 6.0 OR > 6.1. Another question, would I have more success installing 6.0 and > then upgrading the kernel and recompiling with a build-world? I am running 6.0 and 6.1 systems (-STABLE) with both ARECA 12xx cards and 3WARE/AMCC 9550SX cards. Neither are cheap, but they are doing the job and are in use in binary spoolers for news. > I'm currently trying to build a moderate large system with 4 presentation > servers, 2 database servers and one large storage system using NFS mapped to > ~1.2 terrabyte of SATA disks (4x Maxtor 500GB 7200 RPM disks w/RAID5 > config). Any suggestions? Up the # of spindles? :) -- Mike Horwath, reachable via [EMAIL PROTECTED] _______________________________________________ freebsd-performance@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-performance To unsubscribe, send any mail to "[EMAIL PROTECTED]"
