Am 03.04.2013 um 12:53 schrieb Bryan Drewery: > On 4/3/2013 4:17 AM, Stefan Bethke wrote: >> Firstly, is there a better mailing list to discuss poudriere? >> >> I'm just getting my feet wet with poudriere, and are a bit surprised that >> all dependencies for a port are built, instead of installing the packages >> that got built earlier already. Is this intentional? Is there a >> configuration option to have the requisite packages installed before >> building a port? >> >> >> Thanks, >> Stefan >> > > Here or pkg@ is fine. > > This is exactly what it does. It builds the dependencies one time then > installs then builds the port needing them. On the next run if the > dependencies have not updated it reuses them.
That's what I would expect, but that's not what I'm seeing. I've been running build incrementally, fixing a problem, then running bulk again. As expected, only the packages that hadn't been built successfully yet were built. However, dependencies for these ports are not installed from the already created packages, but are recompiled again. In this build log, you can see that pkg is installed from the port instead of from the package; I seem to get this for a large number of builds. I wouldn't really mind except for the enormous amount of time it takes to rebuild the same ports over and over again. I've had some trouble with poudriere not mounting things where they belong. I manually created /usr/ports and /wrkdirs and recreated the "clean" snapshot. This worked around the "mount: no such file or directory" problems, but I guess there might be an underlying cause to these and a couple more issues. How would I go about identifying these? I think I followed the installation instructions very carefully. $ head -100 ImageMagick-6.8.0.7_1.log build started at Wed Apr 3 07:31:08 UTC 2013 port directory: /usr/ports/graphics/ImageMagick building for: 9.1-STABLE amd64 maintained by: [email protected] Makefile ident: $FreeBSD: head/graphics/ImageMagick/Makefile 315309 2013-03-26 15:55:59Z bapt $ Poudriere version: 2.4.1 ---Begin Environment--- BLOCKSIZE=K MAIL=/var/mail/root STATUS=1 PKG_EXT=txz FORCE_PACKAGE=yes tpid=97139 PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/root/bin POUDRIERE_BUILD_TYPE=bulk NBPARALLEL=4 PKGNG=1 PKG_DELETE=/usr/local/sbin/pkg delete -y -f PKG_ADD=/usr/local/sbin/pkg add PWD=/root/eisenboot LOGS=/var/poudriere/data/logs HOME=/root USER=root SKIPSANITY=0 LOCALBASE=/usr/local PACKAGE_BUILDING=yes VERSION=2.4.1 ---End Environment--- ---Begin make.conf--- #### /root/eisenboot/poudriere.d/make.conf #### WITH_PKGNG=yes # Das sollte eigentlich poudriere selber machen WRKDIRPREFIX?= /wrkdirs WRKDIR?= ${WRKDIRPREFIX}${.CURDIR:S/${PORTSDIR}//} MASTER_SITE_BACKUP?= \ http://mirror.hanse.de/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP} # Port-Konfiguration openvpn_UNSET= EASYRSA PACKAGE_BUILDING=yes DISABLE_MAKE_JOBS=yes ---End make.conf--- ---Begin OPTIONS List--- ===> The following configuration options are available for ImageMagick-6.8.0.7_1: 16BIT_PIXEL=on: 16bit pixel support BZIP2=on: bzip2 compression support DJVU=off: DJVU format support (needs THREADS) DOCS=on: Build and/or install documentation FFTW=on: Discrete Fourier Transform support FONTCONFIG=on: X11 font configuration support FPX=on: FlashPix image format support FREETYPE=on: TrueType font rendering support GRAPHVIZ=off: Graphviz support GSLIB=off: libgs (Postscript SHLIB) support HDRI=off: High dynamic range images support JASPER=on: JPEG 2000 support via JasPer JBIG=on: JBIG image format support JPEG=on: JPEG image format support LCMS2=on: LCMS2 support LQR=on: Liquid Rescale support LZMA=on: LZMA compression support MODULES=on: Modules support OPENEXR=off: HDR image format support via OpenEXR OPENMP=off: Parallel processing support via OpenMP PANGO=off: Pango rendering library support PDF=on: PDF document support PERL=on: Perl scripting language support PNG=on: PNG image format support SVG=on: SVG vector image format support TESTS=off: Run bundled self-tests after build THREADS=off: Threading support TIFF=on: TIFF image format support WEBP=on: WebP image format support WMF=on: Windows Metafile support ===> Use 'make config' to modify these settings ---End OPTIONS List--- =======================<phase: depends >========================== ===> ImageMagick-6.8.0.7_1 depends on file: /usr/local/sbin/pkg - not found ===> Verifying install for /usr/local/sbin/pkg in /usr/ports/ports-mgmt/pkg ===> License BSD accepted by the user ===> Fetching all distfiles required by pkg-1.0.11 for building ===> Extracting for pkg-1.0.11 ===> License BSD accepted by the user ===> Fetching all distfiles required by pkg-1.0.11 for building => SHA256 Checksum OK for pkg-1.0.11.tar.xz. ===> Patching for pkg-1.0.11 ===> Configuring for pkg-1.0.11 ===> Building for pkg-1.0.11 sed -e 's,%%PKGVERSION%%,1.0.11,' Doxyfile.in > Doxyfile ===> external (all) ===> external/sqlite (all) Warning: Object directory not changed from original /wrkdirs/ports-mgmt/pkg/pkg-1.0.11/external/sqlite cc -O2 -pipe -fno-strict-aliasing -fPIC -DHAVE_READLINE=1 -I/usr/include/edit -DSQLITE_OMIT_AUTOVACUUM -DSQLITE_OMIT_BLOB_LITERAL -DSQLITE_OMIT_DECLTYPE -DSQLITE_OMIT_EXPLAIN -DSQLITE_OMIT_DEPRECATED -DSQLITE_OMIT_LOAD_EXTENSION -DSQLITE_OMIT_PROGRESS_CALLBACK -DSQLITE_OMIT_TCL_VARIABLE -DSQLITE_OMIT_UTF16 -DSQLITE_OMIT_CAT -DSQLITE_OMIT_CHECK -DSQLITE_OMIT_AUTOINIT -DSQLITE_OMIT_COMPILEOPTION_DIAGS -DSQLITE_OMIT_INTEGRITY_CHECK -DSQLITE_OMIT_BUILTIN_TEST -DSQLITE_OMIT_SHARED_CACHE -DUSE_PREAD -DSQLITE_THREADSAFE=1 -DSQLITE_TEMP_STORE=3 -Dmain=sqlite3_shell -DNDEBUG -std=gnu99 -fstack-protector -Wsystem-headers -Werror -Wno-pointer-sign -Wformat=2 -Wno-format-extra-args -Werror -c sqlite3.c -o sqlite3.o cc -O2 -pipe -fno-strict-aliasing -fPIC -DHAVE_READLINE=1 -I/usr/include/edit -DSQLITE_OMIT_AUTOVACUUM -DSQLITE_OMIT_BLOB_LITERAL -DSQLITE_OMIT_DECLTYPE -DSQLITE_OMIT_EXPLAIN -DSQLITE_OMIT_DEPRECATED -DSQLITE_OMIT_LOAD_EXTENSION -DSQLITE_OMIT_PROGRESS_CALLBACK -DSQLITE_OMIT_TCL_VARIABLE -DSQLITE_OMIT_UTF16 -DSQLITE_OMIT_CAT -DSQLITE_OMIT_CHECK -DSQLITE_OMIT_AUTOINIT -DSQLITE_OMIT_COMPILEOPTION_DIAGS -DSQLITE_OMIT_INTEGRITY_CHECK -DSQLITE_OMIT_BUILTIN_TEST -DSQLITE_OMIT_SHARED_CACHE -DUSE_PREAD -DSQLITE_THREADSAFE=1 -DSQLITE_TEMP_STORE=3 -Dmain=sqlite3_shell -DNDEBUG -std=gnu99 -fstack-protector -Wsystem-headers -Werror -Wno-pointer-sign -Wformat=2 -Wno-format-extra-args -Werror -c shell.c -o shell.o building static sqlite3 library ranlib libsqlite3.a ===> external/libyaml (all) -- Stefan Bethke <[email protected]> Fon +49 151 14070811 _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "[email protected]"
