On 6/14/05, Ev Batey WA6CRE <[EMAIL PROTECTED]> wrote: > > [snipped (every thing)] > >
The KM400 uses the VIA S3 UniChrome. Try changing the driver section in the xorg.conf file to the via driver. "man via" for more info. Starting with a fresh xorg.conf file might be good idea too, "Xorg -configure". As far as the KM266 thingy, both FreeBSD and Xorg say it's a KM400 Chipset*.... see the bottom of my post. *sorry I allmost missed that, the system says it has a "CLE266", not a KM266. The CLE266 uses the UniChrome: "(II) VIA(0): VESA VBE OEM: VIA CLE266" ------------------------------------ "MSI KM3M-V (VIA KM266, registers as KM400)" "Have an MSI KM3M-V KM266 (supposedly an S3 Savage like chip)." ------------------------------------- ABI class: X.Org <http://x.org/> Video Driver, version 0.7 (II) VIA(0): VESA BIOS detected (II) VIA(0): VESA VBE Version 3.0 (II) VIA(0): VESA VBE Total Mem: 65536 kB (II) VIA(0): VESA VBE OEM: VIA CLE266 (II) VIA(0): VESA VBE OEM Software Rev: 0.0 (--) VIA(0): Chipset: "KM400" (--) VIA(0): Chipset Rev.: 132 (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (--) VIA(0): mapping MMIO @ 0xec000000 with size 0x9000 (==) VIA(0): Write-combining range (0xec000000,0x9000) was already clear (--) VIA(0): mapping BitBlt MMIO @ 0xec200000 with size 0x10000 (==) VIA(0): Write-combining range (0xec200000,0x10000) was already clear (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) VIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) VIA(0): videoram = 65536k ------------------------------------- agp0: <VIA 8235/8237 (Apollo KM400/KM400A) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000 agp0: allocating GATT for aperture of size 256M ------------------------------------- http://www.via.com.tw/en/products/chipsets/legacy/km266/ http://www.via.com.tw/en/products/chipsets/k7-series/km400/ KM266 = S3 Graphics ProSavage8 KM400 = UniChrome™ 2D/3D Graphics with motion compensation
_______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
