Hi people.
I have this motherboard:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=652
K8N Neo4 AMD64
I install freebsd 6.0 AMD64, the installation was easy. The
problema is my VGA card is one PCIExpress ATI Radeon X300, i install
suse 10 on the same computer and suse detect the card, i say if suse
can bsd can, but no :-(, on the BIOS i dont have the option PnP OS =
YES or NO, i have 2 options for the VGA card:
PCIE or PCI, and IRQ Auto and Manual, i test both Auto and Manual, but
still didnt detect my card.
I read the NOTES file and found two options:
drm
radeondrm
I enable both options on the kernel file, install the kernel but
still didnt detect my ATI card, this is my dmesg output:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #2: Mon Jan 2 17:05:34 PST 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/AMD64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8065e000.
ACPI APIC Table: <Nvidia AWRDACPI>
Calibrating clock(s) ... i8254 clock: 1193191 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1809280663 Hz
CPU: AMD Athlon(tm) 64 Processor 3000+ (1809.28-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20ff0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 1073676288 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x000000000075b000 - 0x000000003e1affff, 1034244096 bytes (252501 pages)
avail memory = 1029566464 (981 MB)
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
MADT: Interrupt override: source 14, irq 14
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: high
MADT: Interrupt override: source 15, irq 15
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
mem: <memory>
netsmb_dev: loaded
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003804
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=058000] [hdr=00] is there (id=005e10de)
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 24 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 1 func 0
pci_link0: <ACPI PCI Link LNK1> irq 5 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 9 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 9 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link1: <ACPI PCI Link LNK2> irq 3 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 7 9 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 7 9 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link2: <ACPI PCI Link LNK3> irq 3 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 7 9 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 7 9 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link3: <ACPI PCI Link LNK4> irq 11 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link4: <ACPI PCI Link LNK5> on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link5: <ACPI PCI Link LUBA> irq 5 on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 9 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 9 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link6: <ACPI PCI Link LUBB> on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link7: <ACPI PCI Link LMAC> irq 10 on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link8: <ACPI PCI Link LACI> irq 11 on acpi0
pci_link8: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12 14 15
pci_link8: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12 14 15
pci_link8: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link9: <ACPI PCI Link LMCI> irq 5 on acpi0
pci_link9: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 9 10 11 12 14 15
pci_link9: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 9 10 11 12 14 15
pci_link9: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link10: <ACPI PCI Link LSMB> irq 3 on acpi0
pci_link10: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 7 9 10 11 12 14 15
pci_link10: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 7 9 10 11 12 14 15
pci_link10: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link11: <ACPI PCI Link LUB2> irq 10 on acpi0
pci_link11: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12 14 15
pci_link11: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12 14 15
pci_link11: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link12: <ACPI PCI Link LIDE> on acpi0
pci_link12: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link12: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link12: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link13: <ACPI PCI Link LSID> irq 10 on acpi0
pci_link13: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12 14 15
pci_link13: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 7 9 10 11 12 14 15
pci_link13: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link14: <ACPI PCI Link LFID> irq 11 on acpi0
pci_link14: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12 14 15
pci_link14: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 12 14 15
pci_link14: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link15: <ACPI PCI Link LPCA> on acpi0
pci_link15: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link15: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link15: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link16: <ACPI PCI Link APC1> irq 0 on acpi0
pci_link16: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 16
pci_link16: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 16
pci_link16: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16
pci_link17: <ACPI PCI Link APC2> irq 0 on acpi0
pci_link17: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 17
pci_link17: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 17
pci_link17: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 17
pci_link18: <ACPI PCI Link APC3> irq 0 on acpi0
pci_link18: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 18
pci_link18: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 18
pci_link18: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 18
pci_link19: <ACPI PCI Link APC4> irq 0 on acpi0
pci_link19: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 19
pci_link19: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 19
pci_link19: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 19
pci_link20: <ACPI PCI Link APC5> irq 16 on acpi0
pci_link20: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 16 N 0 16
pci_link20: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 16 N 0 16
pci_link20: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16
pci_link21: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link21: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link21: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link21: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link22: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link22: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link22: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link22: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link23: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link23: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link23: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link23: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link24: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link24: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link24: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link24: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link25: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link25: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link25: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link25: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link26: <ACPI PCI Link APCS> irq 0 on acpi0
pci_link26: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link26: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link26: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link27: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link27: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link27: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link27: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link28: <ACPI PCI Link APCZ> irq 0 on acpi0
pci_link28: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link28: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link28: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link29: <ACPI PCI Link APSI> irq 0 on acpi0
pci_link29: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link29: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link29: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link30: <ACPI PCI Link APSJ> irq 0 on acpi0
pci_link30: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link30: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link30: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link31: <ACPI PCI Link APCP> irq 0 on acpi0
pci_link31: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link31: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link31: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.1.INTA at func 1: 3
pci_link26: BIOS IRQ 3 for -2146026886.1.INTA is invalid
ACPI: Found matching pin for 0.2.INTA at func 0: 5
pci_link21: BIOS IRQ 5 for -2146026886.2.INTA is invalid
ACPI: Found matching pin for 0.2.INTB at func 1: 10
pci_link27: BIOS IRQ 10 for -2146026886.2.INTB is invalid
ACPI: Found matching pin for 0.10.INTA at func 0: 10
pci_link23: BIOS IRQ 10 for -2146026886.10.INTA is invalid
ACPI: Found matching pin for 0.4.INTA at func 0: 11
pci_link24: BIOS IRQ 11 for -2146026886.4.INTA is invalid
ACPI: Found matching pin for 0.7.INTA at func 0: 10
pci_link29: BIOS IRQ 10 for -2146026886.7.INTA is invalid
ACPI: Found matching pin for 0.8.INTA at func 0: 11
pci_link30: BIOS IRQ 11 for -2146026886.8.INTA is invalid
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x10de, dev=0x005e, revid=0xa3
bus=0, slot=0, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0050, revid=0xa3
bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0052, revid=0xa2
bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000ff00, size 5, enabled
map[20]: type 4, range 32, base 00004c00, size 6, enabled
map[24]: type 4, range 32, base 00004c40, size 6, enabled
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.APCS:0)
pci_link26: Picked IRQ 20 with weight 0
pcib0: slot 1 INTA routed to irq 20 via \\_SB_.PCI0.APCS
found-> vendor=0x10de, dev=0x005a, revid=0xa2
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base febff000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.APCF:0)
pci_link21: Picked IRQ 21 with weight 0
pcib0: slot 2 INTA routed to irq 21 via \\_SB_.PCI0.APCF
found-> vendor=0x10de, dev=0x005b, revid=0xa3
bus=0, slot=2, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base feb00000, size 8, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.PCI0.APCL:0)
pci_link27: Picked IRQ 22 with weight 0
pcib0: slot 2 INTB routed to irq 22 via \\_SB_.PCI0.APCL
found-> vendor=0x10de, dev=0x0059, revid=0xa2
bus=0, slot=4, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000ea00, size 8, enabled
map[14]: type 4, range 32, base 0000ee00, size 8, enabled
map[18]: type 1, range 32, base febfd000, size 12, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.APCJ:0)
pci_link24: Picked IRQ 23 with weight 0
pcib0: slot 4 INTA routed to irq 23 via \\_SB_.PCI0.APCJ
found-> vendor=0x10de, dev=0x0053, revid=0xf2
bus=0, slot=6, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000fb00, size 4, enabled
found-> vendor=0x10de, dev=0x0054, revid=0xf3
bus=0, slot=7, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 000009f0, size 3, enabled
map[14]: type 4, range 32, base 00000bf0, size 2, enabled
map[18]: type 4, range 32, base 00000970, size 3, enabled
map[1c]: type 4, range 32, base 00000b70, size 2, enabled
map[20]: type 4, range 32, base 0000f600, size 4, enabled
map[24]: type 1, range 32, base febfb000, size 12, enabled
pcib0: matched entry for 0.7.INTA (src \\_SB_.PCI0.APSI:0)
pci_link29: Picked IRQ 21 with weight 1
pcib0: slot 7 INTA routed to irq 21 via \\_SB_.PCI0.APSI
found-> vendor=0x10de, dev=0x0055, revid=0xf3
bus=0, slot=8, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 000009e0, size 3, enabled
map[14]: type 4, range 32, base 00000be0, size 2, enabled
map[18]: type 4, range 32, base 00000960, size 3, enabled
map[1c]: type 4, range 32, base 00000b60, size 2, enabled
map[20]: type 4, range 32, base 0000f100, size 4, enabled
map[24]: type 1, range 32, base febfa000, size 12, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.APSJ:0)
pci_link30: Picked IRQ 22 with weight 1
pcib0: slot 8 INTA routed to irq 22 via \\_SB_.PCI0.APSJ
found-> vendor=0x10de, dev=0x005c, revid=0xa2
bus=0, slot=9, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x0057, revid=0xa3
bus=0, slot=10, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base febf9000, size 12, enabled
map[14]: type 4, range 32, base 0000f000, size 3, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.APCH:0)
pci_link23: Picked IRQ 23 with weight 1
pcib0: slot 10 INTA routed to irq 23 via \\_SB_.PCI0.APCH
found-> vendor=0x10de, dev=0x005d, revid=0xa3
bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x005d, revid=0xa3
bus=0, slot=12, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x005d, revid=0xa3
bus=0, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x005d, revid=0xa3
bus=0, slot=14, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfebff000-0xfebfffff irq
21 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfebff000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeb00000-0xfeb000ff
irq 22 at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfeb00000
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
pci0: <multimedia, audio> at device 4.0 (no driver attached)
atapci0: <nVidia nForce4 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfb00-0xfb0f at device 6.0 on
pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=10 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ata1: [MPSAFE]
atapci1: <nVidia nForce4 SATA150 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf600-0xf60f mem
0xfebfb000-0xfebfbfff irq 21 at device 7.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf600
atapci1: [MPSAFE]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfebfb000
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70
ata3: SATA connect status=00000000
ata3: [MPSAFE]
atapci2: <nVidia nForce4 SATA150 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf100-0xf10f mem
0xfebfa000-0xfebfafff irq 22 at device 8.0 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf100
atapci2: [MPSAFE]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfebfa000
atapci2: [MPSAFE]
ata4: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata5: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60
ata5: SATA connect status=00000000
ata5: [MPSAFE]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xfe900000-0xfe9fffff
pcib1: prefetched decode 0xfea00000-0xfeafffff
pcib1: Subtractively decoded bridge.
ACPI: Found matching pin for 0.7.INTA at func 0: 21
pci_link17: BIOS IRQ 21 for 0.7.INTA is invalid
ACPI: Found matching pin for 0.8.INTA at func 0: 22
pci_link18: BIOS IRQ 22 for 0.8.INTA is invalid
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x11c1, dev=0x044c, revid=0x02
bus=1, slot=7, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns)
intpin=a, irq=3
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base fe9ff000, size 8, enabled
pcib1: (null) requested memory range 0xfe9ff000-0xfe9ff0ff: good
map[14]: type 4, range 32, base 0000df00, size 3, enabled
pcib1: (null) requested I/O range 0xdf00-0xdf07: in range
map[18]: type 4, range 32, base 0000da00, size 8, enabled
pcib1: (null) requested I/O range 0xda00-0xdaff: in range
pcib1: matched entry for 1.7.INTA (src \\_SB_.PCI0.APC2:0)
pci_link17: Picked IRQ 17 with weight 0
pcib1: slot 7 INTA routed to irq 17 via \\_SB_.PCI0.APC2
found-> vendor=0x134d, dev=0x2189, revid=0x03
bus=1, slot=8, func=0
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x3e (15500 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fe9fe000, size 12, enabled
pcib1: (null) requested memory range 0xfe9fe000-0xfe9fefff: good
map[14]: type 4, range 32, base 0000dc00, size 8, enabled
pcib1: (null) requested I/O range 0xdc00-0xdcff: in range
pcib1: matched entry for 1.8.INTA (src \\_SB_.PCI0.APC3:0)
pci_link18: Picked IRQ 18 with weight 0
pcib1: slot 8 INTA routed to irq 18 via \\_SB_.PCI0.APC3
found-> vendor=0x1106, dev=0x3044, revid=0x80
bus=1, slot=12, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base fe9fd000, size 11, enabled
pcib1: (null) requested memory range 0xfe9fd000-0xfe9fd7ff: good
map[14]: type 4, range 32, base 0000de00, size 7, enabled
pcib1: (null) requested I/O range 0xde00-0xde7f: in range
pcib1: matched entry for 1.12.INTA (src \\_SB_.PCI0.APC4:0)
pci_link19: Picked IRQ 19 with weight 0
pcib1: slot 12 INTA routed to irq 19 via \\_SB_.PCI0.APC4
pci1: <simple comms> at device 7.0 (no driver attached)
pci1: <simple comms, generic modem> at device 8.0 (no driver attached)
pci1: <serial bus, FireWire> at device 12.0 (no driver attached)
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xf000-0xf007 mem
0xfebf9000-0xfebf9fff irq 23 at device 10.0 on pci0
nve0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfebf9000
nve0: Ethernet address 00:11:09:eb:c7:d6
miibus0: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x005043, model 0x000c, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
nve0: Ethernet address: 00:11:09:eb:c7:d6
nve0: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xfe800000-0xfe8fffff
pcib2: prefetched decode 0xfe700000-0xfe7fffff
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.XVR3
- AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xb000-0xbfff
pcib3: memory decode 0xfe600000-0xfe6fffff
pcib3: prefetched decode 0xfe500000-0xfe5fffff
pcib3: could not get PCI interrupt routing table for \\_SB_.PCI0.XVR2
- AE_NOT_FOUND
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found-> vendor=0x11ab, dev=0x4362, revid=0x15
bus=3, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x4010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type 1, range 64, base fe6fc000, size 14, enabled
pcib3: (null) requested memory range 0xfe6fc000-0xfe6fffff: good
map[18]: type 4, range 32, base 0000be00, size 8, enabled
pcib3: (null) requested I/O range 0xbe00-0xbeff: in range
pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.APC1:0)
pci_link16: Picked IRQ 16 with weight 0
pcib0: slot 12 INTA routed to irq 16 via \\_SB_.PCI0.APC1
pcib3: slot 0 INTA is routed to irq 16
pci3: <network, ethernet> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xa000-0xafff
pcib4: memory decode 0xfe400000-0xfe4fffff
pcib4: prefetched decode 0xfe300000-0xfe3fffff
pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.XVR1
- AE_NOT_FOUND
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0x9000-0x9fff
pcib5: memory decode 0xfe200000-0xfe2fffff
pcib5: prefetched decode 0xd8000000-0xdfffffff
pcib5: could not get PCI interrupt routing table for \\_SB_.PCI0.XVR0
- AE_NOT_FOUND
pci5: <ACPI PCI bus> on pcib5
pci5: physical bus=5
found-> vendor=0x1002, dev=0x5b60, revid=0x00
bus=5, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 3, range 32, base d8000000, size 27, enabled
pcib5: (null) requested memory range 0xd8000000-0xdfffffff: good
map[14]: type 4, range 32, base 00009e00, size 8, enabled
pcib5: (null) requested I/O range 0x9e00-0x9eff: in range
map[18]: type 1, range 32, base fe2f0000, size 16, enabled
pcib5: (null) requested memory range 0xfe2f0000-0xfe2fffff: good
pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.APC3:0)
pcib0: slot 14 INTA routed to irq 18 via \\_SB_.PCI0.APC3
pcib5: slot 0 INTA is routed to irq 18
found-> vendor=0x1002, dev=0x5b70, revid=0x00
bus=5, slot=0, func=1
class=03-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fe2e0000, size 16, memory disabled
pcib5: (null) requested memory range 0xfe2e0000-0xfe2effff: good
pci5: <display, VGA> at device 0.0 (no driver attached)
pci5: <display> at device 0.1 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0xc29 0xc39 0xc29 0xc29
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b
irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xc29 0xc29 0xc29 0xc29
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ulpt0: Hewlett-Packard DeskJet 960C, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 100515285 hz
Timecounter "TSC" frequency 1809280663 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on nVidia nForce4 chip
acd0: setting UDMA33 on nVidia nForce4 chip
acd0: <HL-DT-ST RW/DVD GCC-4480B/1.00> CDRW drive at ata0 as master
acd0: read 8251KB/s (8251KB/s) write 8251KB/s (8251KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: setting PIO4 on nVidia nForce4 chip
acd1: setting UDMA33 on nVidia nForce4 chip
acd1: <HL-DT-ST GCE-8526B/1.01> CDRW drive at ata0 as slave
acd1: read 8957KB/s (8957KB/s) write 8957KB/s (8957KB/s), 2048KB buffer, UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, packet
acd1: Writes: CDR, CDRW, test write, burnproof
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 114473MB <Seagate ST3120827AS 3.42> at ata2-master SATA150
ad4: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ATA PseudoRAID loaded
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
GEOM: new disk ad4
Trying to mount root from ufs:/dev/ad4s3a
start_init: trying /sbin/init
splash: image decoder found: daemon_saver
nve0: link state changed to UP
If iam correct pci5 is my the PCIE card...? But dont see nothing
that say PCIExpress Card...?
I have 2 options, find another VGA card compatible with freebsd or
continue locking for help and maybe the results would not be good ?
Another thing is that, if i compile the GENERIC kernel deleting
some fields but let the 3 options for Firewire support, make send me
errors and dosent finish...?
Any help will be apreciated people, thanks all forr your time and
great year to all!!!
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
