On Sat, 14 Jan 2006 13:26:11 -0800, Sebastian wrote: > Hi, > Installing 6.0-RELEASE on a new machine. (Have tried 5.4 too). Using a > PCChips M848ALU motherboard with onboard SiS > IDE controller, and a Hitachi 160gb disk. > > When my disk is in UDMA6 (133) mode, FreeBSD dies painfully with many > errors like: > > ad0: WARNING - WRITE_DMA48 UDMA ICRC error (retrying request) > LBA=316139999 > ad0: WARNING - WRITE_DMA48 UDMA ICRC error (retrying request) > LBA=316139999 > ad0: FAILURE - WRITE_DMA48 status=51(READY,DSC,ERROR) > error=4(ABORTED) LBA=316139999 > > It then panics and dumps: > > panic: initiate_write_inodeblock_ufs2: already started > Are you sure that your hard drive is not dying? Run smartctl -a /dev/ad0 and see if any errors were being logged. (smartctl is part of the smartmontools port) You should also try another cable.
-- Markus _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"