I was physically at the machine yesterday with the SmartStart CD in hand, but as I was about to boot off that CD thought it would be only useful for setting up drive arrays...not the tape drive. So I didn't pursue it. I'll have to check it out later today...
I'll let you and the maillist know, Roy --- "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote: > On 2/1/06, RA Cohen <[EMAIL PROTECTED]> wrote: > > Hi All, > > > > I'm running several Compaq Proliant DL360 servers, all with > FBSD > > 6.0-RELEASE. > > > > One of these has an internal Quantum DLT 4000 (that's how > the > > BIOS identifies it) tape drive. I need to use it, but can > find > > no evidence of this hardware in the dmesg output. > . . . > > The system sees the integrated controller and uses ida0 to > id > > it, but does not see the tape drive. > > > > If it's anything like my old proliant, the tape drive > is on ncr0 or ncr1 (or sym[01] any of which are the > on-board scsi controllers), which do not appear to probe > on your system. If your tape drive is cabled to > ida0 or ida1, you'll probably need to resort to the > array controller firmware or CD, depending, and > set it up from there. > > > -- > -- > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"