> I have carefully dried out all the units. You may want to use some distilled water, or very clean water, if there is any visible residue/chalk/salt on the boards.
What I normally do with WiFi equipment which got wet/soaked is to rinse them well with very clean water and then dry them in an oven with the door open or with a hair dryer. This works well. Note that water may collect in places like coils and under IC's and inside drives. If it was salt water then *immediately* rinse them with fresh water or demineralized water to stop corrosion (and keep them wet until you can do so). Though with salt water if the machine was on you are often too late. My experience is that also normal tap water has enough conductivty to ruin a machine when it is switched on before it is 100% dry everywhere. The high voltage power supply is in my experience the first thing to give. Dw To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message