I would check that you have the IDE interface enabled that the CD plugs
into. Have you tried booting other bootable CD's like a WinXP CD just to
see if you get it to boot from CD.
-Derek
At 05:20 PM 8/21/2006, Jerry McAllister wrote:
Hi All,
I am trying to set up a notebook computer for someone (I only have
towers and rackmount servers running FreeBSD myself).
The machine is an IBM Z61t Lenova with 2 GHz Intel CPU, 1 GB memory
The BIOS version is 1.06 (7FET46WW) of 2006-04-27
I has an: ATAPI CD0:MATSHITADVD-RAM UK-842-(PM) cd/dvd reader/burner.
I got a USB floppy and put it on too.
The boot order in BIOS is currently CD, Floppy Hard disk
I have switched floppy and CD a couple of times and removed
a number of other thing from the boot order - mostly things
that are not actually on the machine.
I was able to boot Partition Magic with the USB floppy and fix up
the hard disk to make room. I added a FAT32 (#3) slice and an
undesignated slice (#4). I hoped to add FreeBSD to the undesignated
slice and use the FAT32 for communication between WinXP and FreeBSD
since the XP slice was NTFS.
But, it will not boot the FreeBSD 6.1 installation CD - it completely
ignores it and boots WinXP, even though it looks like it is enabled
in the BIOS. It doesn't even seem to try booting the CD and fail.
The BIOS doesn't appear to talk to it at all.
That CD worked fine in another (deskside) machine - a Dell, by
the way. I had no trouble doing an install with it on that machine.
So, I made a set of 6.1 install floppies.
Although the Partition Magic (several years old copy) floppies booted
just fine, when I started to boot from the boot.flp floppy it read it
and then started repeatedly dumping some message on the screen. It
just kept scrolling up too fast to read. It looked like it might
be 5 or 6 lines long.
Just in case it was telling me to put in the kern1.flp, I did that
and hit enter, but it did not stop scrolling what appeared to be
the same message, nor did it appear to read that floppy at all.
I have rummaged through the BIOS setup and not found anything that
jumps out at me that I should turn on or off. I did not find
anything that looked like 'plug n play'.
So, my obvious question is: (questions are:)
Is there any hope of installing FreeBSD on this notebook computer?
Is there something I can turn on or off to make it work?
Why will the old Partition Magic floppy work, but the new FreeBSD 6.1 not?
Why doesn't the BIOS even attempt to check the CD for a boot sector,
but just ignore it completely and boot the HD?
Thanks for any clues or solid informatino,
////jerry
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
