On Wednesday 13 December 2006 19:08, Chuck Swiger wrote: > On Dec 13, 2006, at 5:01 PM, N. Harrington wrote: > > I have tried one way, however when I use it I seem to > > have an odd broadcast occuring on my switch. Such that > > I am seeing incoming traffic hit some other ports on > > the switch. Can someone confirm if I am doing it > > correctly? Perhaps I have a switch issue? > > Do I also need to bond the ports together on the > > switch? > > Yes, the switch would need to support Cisco's FEC protocol if you > want to use ng_fec with it. > > > Sadly the switch they are connected to does > > not support port bonding. Does that matter? > > Yep. In many cases, a single 100Mbs link does just fine, but if > you need more bandwidth, you can pick up a gigabit NIC nowadays for > not much. Picking up a GB-capable switch is more expensive, but > perhaps your existing switch might have one or a couple of GB > ports...
Maybe ng_one2many would be of some use depending on the exact situation. -- Thanks, Josh Paetzel _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"