Hello
Cannot
read or play audio cdrom disks. run the Windows install for Win4BSD
the install worked worked with a standard cdrom drive
Can
burn CD-R (with cdrecord dev=1,0,0)
burn DVD-RW (with mkisofs)
play Movie dvds.
read dvd disks
read data cdrom disks
I am using 6.1 Release.
/boot/loader.conf
atapicam_load="YES"
hw.ata.ata_dma="1"
hw.ata.atapi_dma="1"
I have set the mode for the device to UDMA33 from UDMA66.
How can I set this up so the drive boots as UDMA33? Do I add the
following line into the device.hints:
hint.cd.0.mode="UDMA33"?
acd0: DVDR <DVD RW DRU-820A/1.0b> at ata1-master UDMA66
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY DVD RW DRU-820A 1.0b> Removable CD-ROM SCSI-0 device cd0:
66.000MB/s transfers
I am receiving a following errors while booting
cd0: cd present [309837 x 2048 byte records]
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 2 0
(cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST csi:0,0,21,0 asc:64,0
(cd0:ata1:0:0:0): Illegal mode for this track
(cd0:ata1:0:0:0): Unretryable error
(cd0:ata1:0:0:0): cddone: got error 0x6 back
The errors when playing a DVD
(cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 12 fb 0 0 0
c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4
(cd0:ata1:0:0:0): Reserved ASC/ASCQ pair
(cd0:ata1:0:0:0): Unretryable error
(cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 13 4e 0 0 0
c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4
(cd0:ata1:0:0:0): Reserved ASC/ASCQ pair
(cd0:ata1:0:0:0): Unretryable error
(cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 45 f0 0 0 0
c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4
(cd0:ata1:0:0:0): Reserved ASC/ASCQ pair
(cd0:ata1:0:0:0): Unretryable error
(cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 9e 34 0 0 0
c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4
(cd0:ata1:0:0:0): Reserved ASC/ASCQ pair
(cd0:ata1:0:0:0): Unretryable error
Thank you
Aaron