Need help with Sound Card

[aydun]

Hi,

I've got a Rockwell WaveArtist card (RWA010, R6711-31) but I can't configure FreeBSD 4.7 to see it correctly. Bios sees it ok at 0x220 & it works under Windows (IRQ 5)

It's supposed to be ISA PnP and Sound Blaster Pro compatible.

I've tried various combinations of 'device pcm', 'device sb'; 'device sbc', 'device snd' but it when it boots the best it gets is:

sb_reset_dsp failed
unknown: <WaveArtist> can't assign resources

so it at least knows its got a WaveArtist thingy!

Below is the kernel config and dmesg output.

Any ideas?
Thanks
aydun

kernel
======
machine i386
cpu I586_CPU
ident DPRO
maxusers 0
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big directories
options MFS #Memory Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options USER_LDT # for Java and Wine
device isa
device eisa
device pci
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID #Static device numbering
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
pseudo-device splash
device sc0 at isa? flags 0x100
device agp # support several AGP chipsets
device npx0 at nexus? port IO_NPX irq 13
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device ppi # Parallel port interface device
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device ulpt # Printer
device snd
device sb0 at isa? port 0x220 irq 5 drq 1
device sbxvi0 at isa? drq 5
device sbmidi0 at isa? port 0x330

dmesg
=====

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #4: Mon Jan 20 22:12:38 GMT 2003
aydun@big:/usr/obj/usr/src/sys/DPRO
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (166.19-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 134217728 (131072K bytes)
config> di pcic0
No such device: pcic0
Invalid command or syntax. Type `?' for help.
config> di sio1
No such device: sio1
Invalid command or syntax. Type `?' for help.
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di ata1
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 127373312 (124388K bytes)
Preloaded elf kernel "kernel" at 0xc0337000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc033709c.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
dc0: <82c169 PNIC 10/100BaseTX> port 0x1400-0x14ff mem 0x41000000-0x410000ff irq 11 at devi
ce 2.0 on pci0
dc0: Ethernet address: 00:a0:cc:53:fc:50
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0x1000-0x100f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Cirrus Logic GD5436 SVGA controller> at 15.0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sb_reset_dsp failed
sb_reset_dsp failed
unknown: <WaveArtist> can't assign resources
unknown: <WaveArtist> can't assign resources
ad0: 6204MB <ST36531A> [13446/15/63] at ata0-master WDMA2
acd0: CDROM <MATSHITA CR-583> at ata1-master PIO3
Mounting root from ufs:/dev/ad0s1a




To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message