Jerry writes: > On Mon, 22 Sep 2008 09:54:04 -0500 > Martin McCormick <[EMAIL PROTECTED]> wrote: > > We are moving a mrtg system to FreeBSD so I installed > > the port from /usr/ports/net-mgmt/mrtg and the installation went > > flawlessly along with perl5.88 which it needs.
Then, I posted that I had failed to install the snmp utilities so had not done everything necessary. At about that time, I received the message I am partly quoting here. > You might want to check and see if the 'p5-SNMP-Util-1.8.1' port is > installed {/usr/ports/net-mgmt/p5-SNMP-Util}. If not, try installing it > yourself and see if the problem goes away. Thanks greatly. I did in fact not have it, installed it, and the problem is still unchanged. > If you have 'portmanager' installed, you could try: > > portmanager net-mgmt/p5-SNMP-Util -l -p -y I installed portmamager and it reported everything present. > > Check the '/var/log/portmanager.log' to see what transpired. No complaints at all. When installing mrtg, I left the ipv6 box unchecked as we have none, and turned on the snmpV3 support which made no difference. Still the same error: Can't locate SNMP_util.pm in @INC (@INC contains: /usr/local/bin/../lib/mrtg2 /u sr/local/bin /usr/local/lib/perl5/5.8.8/BSDPAN /usr/local/lib/perl5/site_perl/5. 8.8/mach /usr/local/lib/perl5/site_perl/5.8.8 /usr/local/lib/perl5/site_perl /us r/local/lib/perl5/5.8.8/mach /usr/local/lib/perl5/5.8.8 .) at /usr/local/bin/mrt g line 292. Since this is more or less a "dead in the water" error, I suspect I am doing something in the wrong sequence or am not totally starting from scratch on the mrtg make. I have been doing make clean, then make configure and then make install. There is no problem at all with the make process so I am at a loss as to what to try next. Martin McCormick _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"