Hi, I installed a new FreeBSD 4.9 box and is running as a Firewall/NAT device for a small network. I am getting this error twice per day : "/kernel: arplookup 100.93.140.1 failed: host is not on local network" Everything works ok without any problems for all our workstations behind this Firewall/NAT machine. They can browse the Internet, receive emails , etc.. Can anybody tell me how to get ride of this message ?
Sorin Chiorean Network Specialist Computer Partners The setting are the following : To connect to INTERNET I have a radio-modem with a static IP. Lets say that I have this setting from my ISP: DNS 100.93.140.1 IP 102.157.188.141 MASK 255.255.255.224 GW 102.157.188.129 This IP's are not real. I changed the first two numbers. I use IPFILTER and IPNAT with the following settings: ipfilter.conf: pass in all pass out all and ipnat.conf: map xl0 192.168.1.0/24 -> 0.0.0.0/32 portmap tcp/udp 40000:60000 map xl0 192.168.1.0/24 -> 0.0.0.0/32 If I enter "ifconfig -a" I will get : xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=3<rxcsum,txcsum> inet 102.157.188.141 netmask 0xffffffe0 broadcast 102.157.188.159 inet6 fe80::250:daff:fece:8d34%xl0 prefixlen 64 scopeid 0x1 ether 00:50:da:ce:8d:34 media: Ethernet autoselect (10baseT/UTP) status: active xl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=3<rxcsum,txcsum> inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 inet6 fe80::210:5aff:fe5d:ee1a%xl1 prefixlen 64 scopeid 0x2 ether 00:10:5a:5d:ee:1a media: Ethernet autoselect (100baseTX <full-duplex>) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"