The drive that can not be found is a Western Digital WD Enterprise 4360 4.3 GB Wide-Ultra SCSI
I have removed the second SCSI controller card (PCI) and the Seagate SCSI Hard Drive. All that remains is the On-motherboard scsi controller and the western digital SCSI drive. The Compaq Configuration Utility sees the drive. But FreeBSD does not. Any ideas? Is this Drive supported? Thanks Michael E Mercer On Wed, 2003-12-03 at 22:06, Riley J. McIntire wrote: > > From: Michael E. Mercer > > > Ok, its the "System Configuration Utility" supplied by Compaq not the > > BIOS. > > > Michael > > Just to jump in...after reading the thread you probably have hardware > raid 0 (mirroring) on the system using 2 controllers and 2 drives--the > Compaq cu should tell you what's going on. The OS will see the 2 > mirrored drives as one. I'd be careful about changing scsi IDs until you > determine what's going on. > > hth, > > Riley > > > _______________________________________________ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"