On Saturday 31 January 2004 18:54, Jeff Elkins wrote: > > > I _can_ mount cds using the /dev/acd* devices, while using the /dev/cd* > > > devices for writing. Is this the way atapi cdrws are supposed to work > > > under freebsd? > > > > So, is cam compiled into the kernel? Do you have the xpt SCSI driver? > > If cam is configured correctly, there should be mentioning of cd0 > > in /var/run/dmesg.boot and the cd's should be listed via: > > > > camcontrol devlist > > kathix# camcontrol devlist > <DMI MultiFlash 3.00> at scbus0 target 0 lun 0 (pass0,da0) > <DMI MultiFlash 3.00> at scbus0 target 0 lun 1 (pass1,da1) > <DMI MultiFlash 3.00> at scbus0 target 0 lun 2 (pass2,da2) > <DMI MultiFlash 3.00> at scbus0 target 0 lun 3 (pass3,da3) > <SEAGATE ST15230N 0638> at scbus1 target 0 lun 0 (pass4,da4) > <PLEXTOR DVDR PX-708A 1.03> at scbus3 target 0 lun 0 (pass5,cd0) > <TOSHIBA CD-ROM XM-6202B 1110> at scbus3 target 1 lun 0 (pass6,cd1) > > > cd0 at ata1 bus 0 target 0 lun 0 > cd0: <PLEXTOR DVDR PX-708A 1.03> Removable CD-ROM SCSI-0 device > cd0: 16.000MB/s transfers > > cd1 at ata1 bus 0 target 1 lun 0 > cd1: <TOSHIBA CD-ROM XM-6202B 1110> Removable CD-ROM SCSI-0 device > cd1: 16.000MB/s transfers
Try getting rid of the DMI devices. As you can see above, the cd's claim bus0, while cam puts them on bus 3. Still a chance that the seagate overrides them though. If: cdrecord dev=3,0,0 yourfiles.iso works correctly, you might want to follow this up to -current or -hardware. -- Melvyn ======================================================= FreeBSD sarevok.webteckies.org 5.2-CURRENT FreeBSD 5.2-CURRENT #0: Wed Jan 28 18:01:18 CET 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SAREVOK_NOAPM_NODEBUG i386 =======================================================
pgp00000.pgp
Description: signature