sio0: <3COM PCI FaxModem> port 0xb400-0xb407 irq 17 at device 2.0 on pci2
and ati* commands respond: ati9 (1.0USR1008\\Modem\PNP00A2\U.S. Robotics 56K FAX INT)FF
OK ati7 Configuration Profile...
Product type US/Canada Internal Product ID: 00561000 Options V32bis,V.80,V.34+,x2,V.90 Fax Options Class 1/Class 2.0 Line Options Caller ID, Distinctive Ring Clock Freq 92.0Mhz EPROM 256k RAM 32k
FLASH date 10/1/99 FLASH rev 5.20.3
DSP date 10/1/99 DSP rev 5.20.3
OK ati3 U.S. Robotics 56K FAX INT V5.20.3
OK
Alex Teslik wrote:
Hey Jeff,
No, you are correct. I had a 5699B and I have now replaced it with a 5610B. Both modems do not work with 4.8_RELEASE. I started another thread called "struggling with hylafax install" which you have already responded to that details the problems with the 5610B modem. From your uname output I have decided to upgrade to 4.9 RELEASE in the hopes that that supports it. I can't do a 5 branch upgrade right now.
fingers crossed and thanks, Alex
P.S.- I'll update after the results of my upgrade.
---------- Original Message ----------- From: Jeff Gardner <[EMAIL PROTECTED]> To: Christopher Nehren <[EMAIL PROTECTED]> Cc: Alex Teslik <[EMAIL PROTECTED]>, FreeBSD Questions List <[EMAIL PROTECTED]> Sent: Sun, 08 Feb 2004 20:52:51 -0500 Subject: Re: 3Com USRobotics 5699B 56k fax modem install
Christopher Nehren wrote:
If you can, take your 5699B back and get a 5610B. It's a great non-winmodem made by USR, and it gave me many successful and uninterrupted dial-up hours.
OK, mine is the 5610B as well. I was not sure if the 5699B was a winmodem or not. I misread the thread thinking that he replaced a winmodem with a non-winmodem. So, I concur get the 5610B and your problems will be gone.
Jeff
------- End of Original Message -------
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
