The drive is only about 4 months old and freebsd 4.9 has been installed for about 3 1/2 months running flawlessly. I have a spare drive but I sure hate transferring all that data over to the new drive. I took a chance and installed a single drive since I've always had good luck with drives, now it looks like I'll have to invest in that 3ware raid card after all.
Thanks, Kevin -----Original Message----- From: Bill Moran [mailto:[EMAIL PROTECTED] Sent: Monday, June 14, 2004 11:35 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: Hard Drive going bad? (hard error reading fsbn) "Kevin Greenidge" <[EMAIL PROTECTED]> wrote: Has it been doing this since you installed? Or was it working before? Looks like a failed HDD from here. > Here is the /etc/fstab and my dmesg output: > > # Device Mountpoint FStype Options Dump Pass# > /dev/ad0s1b none swap sw 0 0 > /dev/ad0s1a / ufs rw 1 1 > /dev/ad0s1f /home ufs rw,userquota,groupquota 2 2 > /dev/ad0s1g /tmp ufs rw,noexec,nosuid 2 2 > /dev/ad0s1e /usr ufs rw 2 2 > /dev/ad0s1h /var ufs rw,userquota,groupquota 2 2 > /dev/acd0c /cdrom cd9660 ro,noauto 0 0 > proc /proc procfs rw 0 0 > > ----------------------------- > > 2.2 irq 5 > pcib1: <PCI to PCI bridge (vendor=10de device=006c)> at > device 8.0 on pci0 > pci1: <PCI bus> on pcib1 > fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem > 0xe5000000-0xe50fffff,0xe5110000-0xe5110fff irq 11 at device > 6.0 on pci1 > fxp0: Ethernet address 00:90:27:a9:71:66 > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > auto > pci1: <SiS 6326 SVGA controller> at 9.0 irq 12 > atapci0: <Generic PCI ATA controller> port 0xf000-0xf00f at > device 9.0 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > pcib2: <PCI to PCI bridge (vendor=10de device=01e8)> at > device 30.0 on pci0 > pci2: <PCI bus> on pcib2 > orm0: <Option ROMs> at iomem > 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xccfff on isa0 > pmtimer0 on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 > drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on > isa0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem > 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > plip0: <PLIP network interface> on ppbus0 > IP Filter: v3.4.31 initialized. Default = pass all, Logging > = enabled > ata1-slave: ATA identify retries exceeded > ad0: 88350MB <IC35L090AVV207-0> [179505/16/63] at > ata0-master BIOSDMA > acd0: CDROM <Compaq CRD-8322B> at ata1-master PIO4 > Mounting root from ufs:/dev/ad0s1a > ad0s1h: hard error reading fsbn 197442815 of > 26369632-26369887 (ad0s1 bn 197442815; cn 12290 tn 62 sn 59) > trying PIO mode > ad0: DMA problem fallback to PIO mode > ad0: DMA problem fallback to PIO mode > ad0: DMA problem fallback to PIO mode > ad0: DMA problem fallback to PIO mode > ad0: DMA problem fallback to PIO mode > ad0: DMA problem fallback to PIO mode > ad0: DMA problem fallback to PIO mode > ad0: DMA problem fallback to PIO mode > ad0: DMA problem fallback to PIO mode > ad0: DMA problem fallback to PIO mode > ad0: DMA problem fallback to PIO mode > ad0s1h: hard error reading fsbn 197442991 of > 26369632-26369887 (ad0s1 bn 197442991; cn 12290 tn 65 sn 46) > status=59 error=40 > ad0s1h: hard error reading fsbn 197443023 of > 26369664-26369887 (ad0s1 bn 197443023; cn 12290 tn 66 sn 15) > status=59 error=40 > ad0s1h: hard error reading fsbn 197443055 of > 26369696-26369887 (ad0s1 bn 197443055; cn 12290 tn 66 sn 47) > status=59 error=40 > ad0s1h: hard error reading fsbn 197443087 of > 26369728-26369887 (ad0s1 bn 197443087; cn 12290 tn 67 sn 16) > status=59 error=40 > ad0s1h: hard error reading fsbn 197443119 of > 26369760-26369887 (ad0s1 bn 197443119; cn 12290 tn 67 sn 48) > status=59 error=40 > ad0s1h: hard error reading fsbn 197443151 of > 26369792-26369887 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) > status=59 error=40 > ad0s1h: hard error reading fsbn 197443151 of > 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) > status=59 error=40 > ad0s1h: hard error reading fsbn 197443151 of > 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) > status=59 error=40 > ad0s1h: hard error reading fsbn 197443151 of > 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) > status=59 error=40 > ad0s1h: hard error reading fsbn 197443151 of > 26369792-26369823 (ad0s1 bn 197443151; cn 12290 tn 68 sn 17) > status=59 error=40 -- Bill Moran Potential Technologies http://www.potentialtech.com _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"