I believe the problem is solved. I reloaded the firmware for the controller following instructions available at http://h18000.www1.hp.com/support/files/server/us/download/13739.html.
I followed the Netware version of the instruction and all. The update time was well over an hour. HP manual suggested 15 minutes and after 50 minutes the first time out, I cancelled the operaqtion with the belief that the process had hanged. I later repeated the process and left it to run overnight (i had to go home) and when I came im this morning, the update was complete (so I can't tell you how long) and now all seem to be fine. > > Message: 35 > Date: Wed, 21 Jul 2004 12:10:31 -0400 > From: Dew Ediho <[EMAIL PROTECTED]> > Subject: Compaq Prolian CL380 & Array Controller CR3500 Problems: Any > Suggestions Please > To: [EMAIL PROTECTED] > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=US-ASCII > > Dear List members, > > I run freebsd 4.10 on a proliant cl380 server. I split the nodes and > do not use them as a clustered server. > > I created a /Data dir for the primary node using the accompnying SCSI > array (RAID 5) with controller CR3500. > > I configured the controller and created the array using Compaq Array > Utility software . > > The machine ran perfectly for more than 60 days until a power outage > resulted into the box not booting up properly. > > I was able to get the server to boot but accessing the SCSI array is impossible. > > The following are logs from the system > > The machine runs and but I can not use the /Data directory. > > The screen shot of the CR3500 configuration has been convinently located at > > http://www.morgan.edu/newtemp/ErrorReport.pdf > > mailed# df > Filesystem 1K-blocks Used Avail Capacity Mounted on > /dev/idad0s1a 387006 35912 320134 10% / > /dev/da0s1e 70012386 134 64411262 0% /Data > /dev/idad0s1f 2064302 20 1899138 0% /tmp > /dev/idad0s1g 2675182 1026494 1434674 42% /usr > /dev/idad0s1e 2064302 23986 1875172 1% /var > procfs 4 4 0 100% /proc > > /Data directory is on the SCSI array. Others are on the node hard drive. > > mailed# dmesg > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.10-RELEASE #0: Tue May 25 22:47:12 GMT 2004 > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC > Timecounter "i8254" frequency 1193182 Hz > CPU: Intel Pentium III (797.48-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x683 Stepping = 3 > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory = 671072256 (655344K bytes) > avail memory = 646737920 (631580K bytes) > Preloaded elf kernel "kernel" at 0xc0551000. > Pentium Pro MTRR support enabled > md0: Malloc disk > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem > 0xc4000000-0xc4ffffff,0xc5000000-0xc5ffffff irq 15 at device 1.0 on > pci0 > ida0: drives=1 firm_rev=1.42 > idad0: <Compaq Logical Drive> on ida0 > idad0: 8670MB (17756160 sectors), blocksize=512 > fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2400-0x243f mem > 0xc3e00000-0xc3efffff,0xc3fff000-0xc3ffffff irq 5 at device 2.0 on > pci0 > fxp0: Disabling dynamic standby mode in EEPROM > fxp0: New EEPROM ID: 0x40a0 > fxp0: EEPROM checksum @ 0xff: 0x6bc5 -> 0x6bc5 > fxp0: Ethernet address 00:02:a5:09:31:ed > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pci0: <ATI Mach64-GV graphics accelerator> at 3.0 > pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 4.0 > fxp1: <Intel 82559 Pro/100 Ethernet> port 0x2c00-0x2c3f mem > 0xc3c00000-0xc3cfffff,0xc3dfd000-0xc3dfdfff irq 5 at device 5.0 on > pci0 > fxp1: Ethernet address 00:50:8b:b8:2f:33 > inphy1: <i82555 10/100 media interface> on miibus1 > inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x2c40-0x2c4f at > device 15.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > pcib3: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard > pci3: <PCI bus> on pcib3 > sym0: <896> port 0x3000-0x30ff mem > 0xc6ffc000-0xc6ffdfff,0xc6fffc00-0xc6ffffff irq 10 at device 4.0 on > pci3 > sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking > sym1: <896> port 0x3400-0x34ff mem > 0xc6ff8000-0xc6ff9fff,0xc6ffbc00-0xc6ffbfff irq 11 at device 4.1 on > pci3 > sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking > eisa0: <EISA bus> on motherboard > mainboard0: <CPQ0681 (System Board)> on eisa0 slot 0 > orm0: <Option ROMs> at iomem > 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xe8000-0xedfff,0xee000-0xeffff > on isa0 > pmtimer0 on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > ata0-slave: ATAPI identify retries exceeded > acd0: CDROM <CD-224E> at ata0-master PIO4 > Waiting 15 seconds for SCSI devices to settle > pass0 at sym0 bus 0 target 9 lun 0 > pass0: <Compaq CR3500 x2q> Fixed Storage Array SCSI-2 device > pass0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged > Queueing Enabled > pass2 at sym0 bus 0 target 10 lun 0 > pass2: <Compaq CR3500 x2q> Fixed Storage Array SCSI-2 device > pass2: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged > Queueing Enabled > da0 at sym0 bus 0 target 9 lun 1 > da0: <Compaq CR3500 x2q> Fixed Direct Access SCSI-2 device > da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled > da0: 69454MB (142241792 512 byte sectors: 255H 63S/T 8854C) > Mounting root from ufs:/dev/idad0s1a > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: unexpected disconnect > sym0:9:control msgout: 81 22 47 d. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: unexpected disconnect > sym0:9:control msgout: 81 22 61 d. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > sym0: SCSI phase error fixup: CCB already dequeued. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. > > ------------------------------ > > _______________________________________________ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > End of freebsd-questions Digest, Vol 69, Issue 10 > ************************************************* > _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"