Hello,
I am getting the following error message during
the boot process after having compiled a custom
kernel for FreeBSD 5.3-RELEASE-p1.
----8<--------8<--------8<-------8<-----8<-----
Interrupt storm detected on "irq11: ohci+";
throtteling interrupt source
---->8-------->8-------->8------->8----->8-----
In the past I did use the same kernel configuration
file on FreeBSD 5.2.1 which did work perfectly.
Tho - If using the GENERIC kernel that comes
with FreeBSD 5.3 I do not run into any problems.
Can you give any hints how to solve the problem?
Attached you will find the output of dmesg. Tell
me if you need any additional information.
--
Mit freundlichen Gruessen / With kind regards
Daniel S. Haischt | phone: +49 -7032-992909
Grabenstrasse 11 | +49 -700-DHAISCHT
| fax: +49 -7032-992910
D-71083 Herrenberg | fax2mail: +49 -7032-7999738
GERMANY | cell: +49 -172-7668936
email: [EMAIL PROTECTED]
web: http://www.daniel.stefan.haischt.name/
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium/P55C (233.03-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 268435456 (256 MB)
avail memory = 253014016 (241 MB)
Intel Pentium detected, installing workaround for F00F bug
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 5513 UDMA33 controller> port
0xd000-0xd00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 11 at device 1.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
ohci0: <SiS 5571 USB controller> mem 0xe4000000-0xe4000fff irq 11 at device 1.2
on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Atmel Standard USB Hub, class 9/0, rev 1.10/3.00, addr 2
uhub1: 4 ports with 4 removable, self powered
ugen0: Cambridge Silicon Radio Ltd. Bluetooth USB dongle, rev 1.10/5.25, addr 3
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xb800-0xb87f mem
0xe3800000-0xe380007f irq 4 at device 9.0 on pci0
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:10:22:fd:f2:7d
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xb400-0xb4ff mem
0xe3000000-0xe3000fff irq 9 at device 10.0 on pci0
sis0: Silicon Revision: DP83815D
miibus1: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:40:f4:5f:91:ed
pci0: <display, VGA> at device 11.0 (no driver attached)
atapci1: <Promise PDC20269 UDMA133 controller> port
0x9800-0x980f,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xb000-0xb007 mem
0xe2800000-0xe2803fff irq 11 at device 12.0 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
cpu0 on motherboard
orm0: <ISA Option ROMs> at iomem
0xcc000-0xce7ff,0xc8000-0xc87ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc1: parallel port not found.
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0303> can't assign resources (port)
Timecounter "TSC" frequency 233030328 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 1919MB <NEC Corporation DSE2010A/VVK0333> [3900/16/63] at ata0-master WDMA2
ad4: 78533MB <IC35L080AVVA07-0/VA4OA52A> [170197/15/63] at ata2-master UDMA100
acd0: CDRW <PLEXTOR CD-R PREMIUM/1.05> at ata3-master UDMA33
acd1: DVDROM <PLEXTOR DVD-ROM PX-116A2 0100/1.00> at ata3-slave UDMA66
Mounting root from ufs:/dev/ad4s2a
warning: KLD '/boot/kernel.save/ipfw.ko' is newer than the linker.hints file
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to
deny, logging disabled
Accounting enabled
warning: KLD '/boot/kernel.save/linux.ko' is newer than the linker.hints file
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
