I recompiled kernel to include' options PNPBIOS ' ... per the Handbook.
From the motherboard manual:
Epox 8kta3 motherboard
VIA kt133a
built in AC97 (by vt82c686b)
output of uname :
bash-2.05b$ uname -a
FreeBSD home.localdomain 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Sun
Jan 9 09:07:26 CST 2005 [EMAIL PROTECTED]
:/usr/src/sys/i386/compile/MYKERNEL i386
bash-2.05b$
output of dmesg :
bash-2.05b$ dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Sun Jan 9 09:07:26 CST 2005
[EMAIL PROTECTED] :/usr/src/sys/i386/compile/MYKERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a351f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) processor (1403.19-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x644 Stepping = 4
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 872349696 (831 MB)
avail memory = 837726208 (798 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fde40
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on
acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 7 INTD is routed to irq 11
pcib0: slot 7 INTD is routed to irq 11
pcib0: slot 7 INTC is routed to irq 12
pcib0: slot 13 INTA is routed to irq 11
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem
0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 10
pcib1: slot 0 INTA is routed to irq 10
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xd000-0xd00f at device
7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device
7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Kensington Kensington USB/PS2 Wheel Mouse, rev 1.10/1.00, addr
2, iclass 3/1
ums0: 3 buttons and Z dir.
uhub1: ORTEK ORTEK KH12 USB Hub, class 9/0, rev 1.10/3.00, addr 3
uhub1: 3 ports with 2 removable, bus powered
ukbd0: ORTEK USB Hub/Keyboard, rev 1.10/3.00, addr 4, iclass 3/1
kbd0 at ukbd0
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device
7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
pci0: <multimedia, audio> at device 7.5 (no driver attached)
dc0: <ADMtek AN985 10/100BaseTX> port 0xe800-0xe8ff mem
0xe9000000-0xe90003ff irq 11 at device 13.0 on pci0
dc0: Ethernet address: 00:04:5a:7d:96:c5
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1403191078 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
GEOM: create disk ad1 dp=0xc6520e60
ad1: 39266MB <IC35L040AVVN07-0> [79780/16/63] at ata0-slave UDMA100
acd0: CDROM <FX120T> at ata1-master PIO3
Mounting root from ufs:/dev/ad1s1a
drm0: <3dfx Voodoo5> port 0xc000-0xc0ff mem
0xd8000000-0xdfffffff,0xe0000000-0xe3ffffff irq 10 at device 0.0 on
pci1
info: [drm] Initialized tdfx 1.0.0 20010216 on minor 0
bash-2.05b$
Is this the important part...?
pci0: <multimedia, audio> at device 7.5 (no driver attached)
Any help is greatly appreciated....
Thank you,
Gable Barber
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
