Marc G. Fournier wrote:
Self-followup .. the server config is as follows ... did I do maybe
mis-configure the array?
# Vinum configuration of neptune.hub.org, saved at Wed Feb 9 00:13:52
2005
drive d0 device /dev/da1s1a
drive d1 device /dev/da2s1a
drive d2 device /dev/da3s1a
drive d3 device /dev/da4s1a
volume vm
plex name vm.p0 org raid5 1024s vol vm sd name vm.p0.s0 drive d0 plex
vm.p0 len 142314496s driveoffset 265s plexoffset 0s
sd name vm.p0.s1 drive d1 plex vm.p0 len 142314496s driveoffset 265s
plexoffset 1024s
sd name vm.p0.s2 drive d2 plex vm.p0 len 142314496s driveoffset 265s
plexoffset 2048s
sd name vm.p0.s3 drive d3 plex vm.p0 len 142314496s driveoffset 265s
plexoffset 3072s
bassed on an initial config file that looks like:
neptune# cat /root/raid5
drive d0 device /dev/da1s1a
drive d1 device /dev/da2s1a
drive d2 device /dev/da3s1a
drive d3 device /dev/da4s1a
volume vm
plex org raid5 512k
sd length 0 drive d0
sd length 0 drive d1
sd length 0 drive d2
sd length 0 drive d3
It's worth pointing out that your performance on the raid-5 can change
for the better if you avoid having the stripe size be a power of 2.
This is especially true if the (n)umber of disks are a 2^n.
Cheers,
-.mag
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"