Hello,
we have some problems on two machines running freebsd 4.0 with
DLINK DFE-530TX. The problem on both machines is, that the vr0 hangs
(no network traffic) after heavy network load (see messages output
below). Often, the problem can be solved by ifconfig vr0 up, but
sometimes even this does not help.
Configurations of the machines:
===============================
Both machines are Athlons 650, 256MB, Asus K7M 1.04
The first machine runs 4.0-RELEASE and a generic kernel. The machine
is connected to a switch, 100 MBit full-duplex.
Jun 20 11:24:03 goedel /kernel: chip1: <VIA 82C686 ACPI interface> at device 4.4 on
pci0
Jun 20 11:24:03 goedel /kernel: vr0: <VIA VT3043 Rhine I 10/100BaseTX> port
0xd000-0xd07f mem 0xefffff80-0xefffffff irq 9 at device 14.0 on pci0
Jun 20 11:24:03 goedel /kernel: vr0: Ethernet address: 00:50:ba:08:4e:53
Jun 20 11:24:03 goedel /kernel: miibus0: <MII bus> on vr0
Jun 20 11:24:03 goedel /kernel: amphy0: <DM9101 10/100 media interface> on miibus0
Jun 20 11:24:03 goedel /kernel: amphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
Jun 20 11:24:03 goedel /kernel: vr0: supplying EUI64: 00:50:ba:ff:fe:08:4e:53
Jun 19 19:19:22 goedel /kernel: vr0: promiscuous mode enabled
Jun 19 19:19:44 goedel /kernel: vr0: no memory for tx list
Jun 19 19:19:52 goedel last message repeated 12 times
Jun 19 19:20:20 goedel /kernel: vr0: promiscuous mode disabled
Jun 19 19:20:37 goedel /kernel: vr0: no memory for tx list
Jun 19 19:20:44 goedel last message repeated 7 times
Jun 19 19:22:17 goedel last message repeated 8 times
=====================================================
The second machine runs 4.0-STABLE (2000-05-25) and a custom
kernel. It is connected to a hub, 100 MBit half-duplex.
Jun 8 14:05:30 hermite /kernel: vr0: <VIA VT3043 Rhine I 10/100BaseTX> port
0xc400-0xc47f mem 0xefffff80-0xefffffff irq 5 at device 14.0 on pci0
Jun 8 14:05:30 hermite /kernel: vr0: Ethernet address: 00:50:ba:08:46:01
Jun 8 14:05:30 hermite /kernel: miibus0: <MII bus> on vr0
Jun 8 14:05:30 hermite /kernel: amphy0: <DM9101 10/100 media interface> on miibus0
Jun 8 14:05:30 hermite /kernel: amphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
May 26 19:15:38 hermite /kernel: vr0: watchdog timeout
Has anyone seen similar behaviour? Any hints?
Greetings, Chris
--
----------------------------------------------------------------
FB 14 - Informatik
Christian Jacobi Im Stadtwald
Computer Science Department D-66041 Saarbruecken
University of Saarland
Germany Phone: (+49) 681 3024490
Fax: (+49) 681 3024290
----------------------------------------------------------------
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message