Christian Jacobi wrote:
>
> Hello,
>
> we have some problems on two machines running freebsd 4.0 with
> DLINK DFE-530TX. The problem on both machines is, that the vr0 hangs
> (no network traffic) after heavy network load (see messages output
> below). Often, the problem can be solved by ifconfig vr0 up, but
> sometimes even this does not help.
>
> Has anyone seen similar behaviour? Any hints?
>
I have seen similar.
vr0: Ethernet address: 00:50:ba:cf:51:92
miibus0: <MII bus> on vr0
amphy0: <DM9101 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: supplying EUI64: 00:50:ba:ff:fe:cf:51:92
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::250:baff:fecf:5192%vr0 prefixlen 64 scopeid 0x1
inet 192.168.0.24 netmask 0xffffff00 broadcast 192.168.0.255
inet6 3ffe:1ce3:6:0:1::18 prefixlen 64
ether 00:50:ba:cf:51:92
media: autoselect (100baseTX <full-duplex>) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX
10baseT/UTP <full-duplex> 10baseT/UTP none
I have this on two machines. Only one hangs, but it hangs while talking
to the other. Haven't had a chance to invesigate.
Jim
--
Nothing is fool proof, because fools are too ingenious.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message