Dear all,I have no idea why top crashes with segmentation fault on my amd64 machine running FreeBSD 8.0-RELEASE-p2. If someone wants to have a loot at the core dump: http://www.schmalzbauer.de/downloads/top.core
But I think I should recompile it with DEBUG=-g first, right? World and kernel are in sync, I ran an extra build to make that sure. My kernconf follows. Any help appreciated.
Thanks,FreeBSD qaweb.hn.sand.spsnetz.de 8.0-RELEASE-p2 FreeBSD 8.0-RELEASE-p2 #0: Tue Jan 19 22:00:17 CET 2010 ad...@qaweb.hn.sand.spsnetz.de:/usr/obj/usr/src/sys/FJS-RX100S3 amd64
include GENERIC
makeoptions none
nooptions COMPAT_FREEBSD4 # Compatible with FreeBSD4
nooptions COMPAT_FREEBSD5 # Compatible with FreeBSD5
# Floppy drives
nodevice fdc
# ATA and ATAPI devices
#device ata
#device atadisk # ATA disk drives
nodevice ataraid # ATA RAID drives
#device atapicd # ATAPI CDROM drives
nodevice atapifd # ATAPI floppy drives
nodevice atapist # ATAPI tape drives
#options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
nodevice ahb # EISA AHA1742 family
nodevice ahc # AHA2940 and onboard AIC7xxx devices
nooptions AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
nodevice ahd # AHA39320/29320 and onboard AIC79xx
devices
nooptions AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
nodevice amd # AMD 53C974 (Tekram DC-390(T))
nodevice hptiop # Highpoint RocketRaid 3xxx series
nodevice isp # Qlogic family
##device ispfw # Firmware for QLogic HBAs- normally a
module
nodevice mpt # LSI-Logic MPT-Fusion
##device ncr # NCR/Symbios Logic
nodevice sym # NCR/Symbios Logic (newer chipsets +
those of `ncr')
nodevice trm # Tekram DC395U/UW/F DC315U adapters
nodevice adv # Advansys SCSI adapters
nodevice adw # Advansys wide SCSI adapters
nodevice aha # Adaptec 154x SCSI adapters
nodevice aic # Adaptec 15[012]x SCSI adapters,
AIC-6[23]60.
nodevice bt # Buslogic/Mylex MultiMaster SCSI
adapters
nodevice ncv # NCR 53C500
nodevice nsp # Workbit Ninja SCSI-3
nodevice stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
nodevice amr # AMI MegaRAID
nodevice arcmsr # Areca SATA II RAID
##XXX it is not 64-bit clean, -scottl
##device asr # DPT SmartRAID V, VI and Adaptec SCSI
RAID
nodevice ciss # Compaq Smart RAID 5*
nodevice dpt # DPT Smartcache III, IV - See NOTES
for options
nodevice hptmv # Highpoint RocketRAID 182x
nodevice hptrr # Highpoint RocketRAID 17xx, 22xx,
23xx, 25xx
nodevice iir # Intel Integrated RAID
nodevice ips # IBM (Adaptec) ServeRAID
nodevice mly # Mylex AcceleRAID/eXtremeRAID
nodevice twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
nodevice aac # Adaptec FSA RAID
nodevice aacp # SCSI passthrough for aac (requires
CAM)
nodevice ida # Compaq Smart RAID
nodevice mfi # LSI MegaRAID SAS
nodevice mlx # Mylex DAC960 family
#XXX pointer/int warnings
##device pst # Promise Supertrak SX6000
nodevice twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
#device atkbdc # AT keyboard controller
#device atkbd # AT keyboard
#device psm # PS/2 mouse
nodevice kbdmux # keyboard multiplexer
#device vga # VGA video card driver
#device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
#device sc
#device agp # support several AGP chipsets
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
nodevice cbb # cardbus (yenta) bridge
nodevice pccard # PC Card (16-bit) bus
nodevice cardbus # CardBus (32-bit) bus
# Parallel port
nodevice ppc
nodevice ppbus # Parallel port bus (required)
nodevice lpt # Printer
nodevice plip # TCP/IP over parallel
nodevice ppi # Parallel port interface device
##device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 Gigabit Ethernet Family
#device igb # Intel PRO/1000 PCIE Server Gigabit Family
#device ixgb # Intel PRO/10GbE Ethernet Card
#device le # AMD Am7900 LANCE and Am79C9xx PCnet
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
#device miibus # MII bus support
nodevice ae # Attansic/Atheros L2 FastEthernet
nodevice age # Attansic/Atheros L1 Gigabit Ethernet
nodevice alc # Atheros AR8131/AR8132 Ethernet
nodevice ale # Atheros AR8121/AR8113/AR8114 Ethernet
nodevice bce # Broadcom BCM5706/BCM5708 Gigabit
Ethernet
nodevice bfe # Broadcom BCM440x 10/100 Ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
nodevice dc # DEC/Intel 21143 and various workalikes
nodevice et # Agere ET1310 10/100/Gigabit Ethernet
nodevice fxp # Intel EtherExpress PRO/100B (82557,
82558)
nodevice jme # JMicron JMC250 Gigabit/JMC260 Fast
Ethernet
nodevice lge # Level 1 LXT1001 gigabit Ethernet
nodevice msk # Marvell/SysKonnect Yukon II Gigabit
Ethernet
nodevice nfe # nVidia nForce MCP on-board Ethernet
nodevice nge # NatSemi DP83820 gigabit Ethernet
##device nve # nVidia nForce MCP on-board Ethernet
Networking
nodevice pcn # AMD Am79C97x PCI 10/100 (precedence
over 'le')
nodevice re # RealTek 8139C+/8169/8169S/8110S
nodevice rl # RealTek 8129/8139
nodevice sf # Adaptec AIC-6915 (``Starfire'')
nodevice sis # Silicon Integrated Systems SiS
900/SiS 7016
nodevice sk # SysKonnect SK-984x & SK-982x gigabit
Ethernet
nodevice ste # Sundance ST201 (D-Link DFE-550TX)
nodevice stge # Sundance/Tamarack TC9021 gigabit
Ethernet
nodevice tl # Texas Instruments ThunderLAN
nodevice tx # SMC EtherPower II (83c170 ``EPIC'')
nodevice vge # VIA VT612x gigabit Ethernet
nodevice vr # VIA Rhine, Rhine II
nodevice wb # Winbond W89C840F
nodevice xl # 3Com 3c90x (``Boomerang'',
``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
nodevice ed # NE[12]000, SMC Ultra, 3c503, DS8390
cards
nodevice ex # Intel EtherExpress Pro/10 and Pro/10+
nodevice ep # Etherlink III based cards
nodevice fe # Fujitsu MB8696x based cards
nodevice ie # EtherExpress 8/16, 3C507, StarLAN 10
etc.
nodevice sn # SMC's 9000 series of Ethernet chips
nodevice xe # Xircom pccard Ethernet
# Wireless NIC cards
nodevice wlan # 802.11 support
nooptions IEEE80211_DEBUG # enable debug msgs
nooptions IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
nooptions IEEE80211_SUPPORT_MESH # enable 802.11s draft support
nodevice wlan_wep # 802.11 WEP support
nodevice wlan_ccmp # 802.11 CCMP support
nodevice wlan_tkip # 802.11 TKIP support
nodevice wlan_amrr # AMRR transmit rate control algorithm
nodevice an # Aironet 4500/4800 802.11 wireless
NICs.
nodevice ath # Atheros pci/cardbus NIC's
nodevice ath_hal # pci/cardbus chip support
nooptions AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
nodevice ath_rate_sample # SampleRate tx rate control for ath
nodevice ral # Ralink Technology RT2500 wireless
NICs.
nodevice wi # WaveLAN/Intersil/Symbol 802.11
wireless NICs.
##device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
#device loop # Network loopback
#device random # Entropy device
#device ether # Ethernet support
#device tun # Packet tunnel.
#device pty # BSD-style compatibility pseudo ttys
#device md # Memory "disks"
#device gif # IPv6 and IPv4 tunneling
#device faith # IPv6-to-IPv4 relaying (translation)
#device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
#device bpf # Berkeley packet filter
# USB support
#device uhci # UHCI PCI->USB interface
nodevice ohci # OHCI PCI->USB interface
#device ehci # EHCI PCI->USB interface (USB 2.0)
#device usb # USB Bus (required)
##device udbp # USB Double Bulk Pipe devices
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
nodevice ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
nodevice rum # Ralink Technology RT2501USB wireless
NICs
nodevice ural # Ralink Technology RT2500USB wireless
NICs
nodevice uath # Atheros AR5523 wireless NICs
nodevice zyd # ZyDAS zb1211/zb1211b wireless NICs
nodevice urio # Diamond Rio 500 MP3 player
# USB Serial devices
#device u3g # USB-based 3G modems (Option, Huawei, Sierra)
#device uark # Technologies ARK3116 based serial adapters
#device ubsa # Belkin F5U103 and compatible serial adapters
#device uftdi # For FTDI usb serial adapters
#device uipaq # Some WinCE based devices
#device uplcom # Prolific PL-2303 serial adapters
#device uslcom # SI Labs CP2101/CP2102 serial adapters
#device uvisor # Visor and Palm devices
#device uvscom # USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
nodevice aue # ADMtek USB Ethernet
nodevice axe # ASIX Electronics USB Ethernet
nodevice cdce # Generic USB over Ethernet
nodevice cue # CATC USB Ethernet
nodevice kue # Kawasaki LSI USB Ethernet
nodevice rue # RealTek RTL8150 USB Ethernet
nodevice udav # Davicom DM9601E USB
# FireWire support
nodevice firewire # FireWire bus code
nodevice sbp # SCSI over FireWire (Requires scbus
and da)
nodevice fwe # Ethernet over FireWire (non-standard!)
nodevice fwip # IP over FireWire (RFC 2734,3146)
nodevice dcons # Dumb console driver
nodevice dcons_crom # Configuration ROM for dcons
##############
### Extras ###
##############
ident FJS-RX100S3
device ahci
device smbus # Bus support, required for smb below.
device smb
device ichsmb
#device coretemp
device ichwd
options ZERO_COPY_SOCKETS
options GEOM_MIRROR
options GEOM_JOURNAL
options MAXCONS=12
options SC_HISTORY_SIZE=2000
options SC_PIXEL_MODE
options SC_DFLT_FONT
makeoptions SC_DFLT_FONT=iso15
options ATKBD_DFLT_KEYMAP
makeoptions ATKBD_DFLT_KEYMAP=german.iso
options UKBD_DFLT_KEYMAP
makeoptions UKBD_DFLT_KEYMAP=german.iso
signature.asc
Description: OpenPGP digital signature
