On 2/27/2010 9:09 PM, Rui Paulo wrote: > On 27 Feb 2010, at 20:29, Robert Watson wrote: > Progress on supporting 11n with atheros cards is on going. There's much more > to it than adapting the rate control algorithm. Please stay tuned.
Are you aware if similar work ongoing for the mwl(4) based 802.11n cards? I picked up a couple cheap this past week and have them working with hostapd but, as with the OP in the thread, only with G rates. The ifconfig[1] output suggests that it is using 40MHz wide ht channels but devices only associate at 54Mbps[2]. Jim [1] ifconfig mwl0_wlan1 mwl0_wlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:01:36:17:96:0e inet6 fe80::201:36ff:fe17:960e%mwl0_wlan1 prefixlen 64 scopeid 0x9 inet 192.168.15.1 netmask 0xffffff00 broadcast 192.168.15.255 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> media: IEEE 802.11 Wireless Ethernet autoselect mode 11na <hostap> status: running ssid WatchTower channel 100 (5500 MHz 11a ht/40+) bssid 00:01:36:17:96:0e regdomain DEBUG indoor authmode WPA2/802.11i privacy MIXED deftxkey 3 AES-CCM 2:128-bit AES-CCM 3:128-bit txpower 14 scanvalid 60 ampdulimit 64k ampdudensity 4 shortgi smps burst dtimperiod 1 [2] ifconfig mwl0_wlan1 list sta (w/addr removed) AID CHAN RATE RSSI IDLE TXSEQ RXSEQ CAPS FLAG 1 120 54M 33.0 0 1537 25952 EP A RSN (rssi 68:20:20 nf 0:0:0) _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
