On Thu, 22 Jul 2010, Dan Langille wrote:
On 7/22/2010 2:59 AM, Andrey V. Elsukov wrote:
On 22.07.2010 10:32, Dan Langille wrote:
I'm not sure of the criteria, but this is what I'm running:
atapci0:<SiI 3124 SATA300 controller> port 0xdc00-0xdc0f mem
0xfbeffc00-0xfbeffc7f,0xfbef0000-0xfbef7fff irq 17 at device 4.0 on pci7
atapci1:<SiI 3124 SATA300 controller> port 0xac00-0xac0f mem
0xfbbffc00-0xfbbffc7f,0xfbbf0000-0xfbbf7fff irq 19 at device 4.0 on pci3
I added ahci_load="YES" to loader.conf and rebooted. Now I see:
You can add siis_load="YES" to loader.conf for SiI 3124.
Ahh, thank you.
I'm afraid to do that now, before I label my ZFS drives for fear that the ZFS
array will be messed up. But I do plan to do that for the system after my
plan is implemented. Thank you. :)
You may even get hotplug support if you're lucky. :)
I just built a box and gave it a spin with the "old" ata stuff and then
with the "new" (AHCI) stuff. It does perform a bit better and my BIOS
claims it supports hotplug with ahci enabled as well... Still have to
test that.
Charles
--
Dan Langille - http://langille.org/
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
