Joerg Schilling-3 wrote: > > wodim is a dead end from a 6 year old version of cdrecord with the DVD > support > ripped off and replaced by something broken. But there have been even more > bugs > added to wodim and it is not under "development" since May 2007. > > If cdrecord gives the same message, I encourage you to make a kernel bug > report. > This message is a hint to a serious kernel problem. A sense key value -1 > cannot > happen, so you need to find out why the SCSI command has not been > transported > correctly by the kernel. >
Hi Jörg. I usually prefer cdrtools, wodim was convenient way to try old code. After booting GENERIC kernel + ahci driver and compiling cdrtools release problem is still present. Full message. cdrecord: No write mode specified. cdrecord: Assuming -sao mode. cdrecord: If your drive does not accept -sao, try -tao. cdrecord: Future versions of cdrecord may have different drive dependent defaults. Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright (C) 1995-2010 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Using libscg version 'schily-0.9'. SCSI buffer size: 65536 atapi: 0 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GSA-U20N ' Revision : 'HX11' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Current: DVD-R sequential recording Profile: DVD-RAM Profile: DVD-R sequential recording (current) Profile: DVD-R/DL sequential recording Profile: DVD-R/DL layer jump recording Profile: DVD-RW sequential recording Profile: DVD-RW restricted overwrite Profile: DVD+RW Profile: DVD+R Profile: DVD+R/DL Profile: DVD-ROM Profile: CD-R Profile: CD-RW Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd). Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE Supported modes: PACKET SAO LAYER_JUMP Drive buf size : 1114112 = 1088 KB Drive pbuf size: 1966080 = 1920 KB Drive DMA Speed: 15100 kB/s 85x CD 10x DVD 3x BD FIFO size : 4194304 = 4096 KB Track 01: data 2858 MB Total size: 2858 MB = 1463428 sectors Current Secsize: 2048 Total power on hours: 0 Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 835068 Starting to write CD/DVD/BD at speed 8 in real SAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Turning BURN-Free off Starting new track at sector: 0 Track 01: 0 of 2858 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 00 00 00 00 20 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 23.946s timeout 200s write track data: error after 0 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. Writing time: 29.002s Average write speed 74.7x. Fixating... Fixating time: 22.355s cdrecord: fifo had 64 puts and 1 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. I destroyed all my spare media, so I'm also spared from burning problems for now ;) I'm quite puzzled that only I have reported such problems, it's like I'm on CURRENT again.. best regards, - Jakub Lach -- View this message in context: http://old.nabble.com/cdrtools--devel-and-wodim-broken-tp29978939p30056250.html Sent from the freebsd-stable mailing list archive at Nabble.com. _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"