On Wed, Nov 17, 2010 at 06:26:56PM -0500, Alexandre Sunny Kovalenko wrote: > On Thu, 2010-11-18 at 10:06 +1100, Andrew Reilly wrote: > > On Wed, Nov 17, 2010 at 01:42:15PM +1100, Ian Smith wrote: > > > I'm used to seeing est either attach to both CPUs, or fail to attach to > > > either CPU. Here it's attached to cpu0, but not to cpu1. Is that odd? > > > > It seems odd, but since I don't know what est does (there isn't > > a man page), I'm not sure how it (possibly) being broken > > affects me. > > > > Cheers, > > > > Faint reference to 'est' could be found in 'man cpufreq'.
Thanks for the reference! From reading that, it seems as though the sysctl-exposed functionality matches the dmesg.boot description (speed controls only available on cpu 0): dev.cpu.0.%desc: ACPI CPU dev.cpu.0.%driver: cpu dev.cpu.0.%location: handle=\_PR_.CPU0 dev.cpu.0.%pnpinfo: _HID=none _UID=0 dev.cpu.0.%parent: acpi0 dev.cpu.0.freq: 2933 dev.cpu.0.freq_levels: 2933/90000 2799/83000 2666/77000 2533/71000 2399/65000 2266/59000 2133/53000 1999/46000 1866/40000 1733/34000 1599/28000 1466/22000 1333/16000 1199/10000 1049/8750 899/7500 749/6250 599/5000 449/3750 299/2500 149/1250 dev.cpu.0.cx_supported: C1/3 C2/205 C3/245 dev.cpu.0.cx_lowest: C1 dev.cpu.0.cx_usage: 100.00% 0.00% 0.00% last 311us dev.cpu.1.%desc: ACPI CPU dev.cpu.1.%driver: cpu dev.cpu.1.%location: handle=\_PR_.CPU1 dev.cpu.1.%pnpinfo: _HID=none _UID=0 dev.cpu.1.%parent: acpi0 dev.cpu.1.cx_supported: C1/3 C2/205 C3/245 dev.cpu.1.cx_lowest: C1 dev.cpu.1.cx_usage: 100.00% 0.00% 0.00% last 191us Since the cpufreq man page lists the inability to set the frequency of different CPUs differently, perhaps this isn't a bug at all? Cheers, -- Andrew _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"