On Thu, 2010-11-18 at 11:13 +1100, Andrew Reilly wrote: > Hi Alexandre, > > On Wed, Nov 17, 2010 at 06:56:53PM -0500, Alexandre Sunny Kovalenko wrote: > > On Thu, 2010-11-18 at 10:40 +1100, Andrew Reilly wrote: > > > dev.cpu.0.%desc: ACPI CPU > > > dev.cpu.0.%driver: cpu > > > dev.cpu.0.%location: handle=\_PR_.CPU0 > > > dev.cpu.0.%pnpinfo: _HID=none _UID=0 > > > dev.cpu.0.%parent: acpi0 > > > dev.cpu.0.freq: 2933 > > > dev.cpu.0.freq_levels: 2933/90000 2799/83000 2666/77000 2533/71000 > > > 2399/65000 2266/59000 2133/53000 1999/46000 1866/40000 1733/34000 > > > 1599/28000 1466/22000 1333/16000 1199/10000 1049/8750 899/7500 749/6250 > > > 599/5000 449/3750 299/2500 149/1250 > > > dev.cpu.0.cx_supported: C1/3 C2/205 C3/245 > > > dev.cpu.0.cx_lowest: C1 > > > dev.cpu.0.cx_usage: 100.00% 0.00% 0.00% last 311us > > > dev.cpu.1.%desc: ACPI CPU > > > dev.cpu.1.%driver: cpu > > > dev.cpu.1.%location: handle=\_PR_.CPU1 > > > dev.cpu.1.%pnpinfo: _HID=none _UID=0 > > > dev.cpu.1.%parent: acpi0 > > > dev.cpu.1.cx_supported: C1/3 C2/205 C3/245 > > > dev.cpu.1.cx_lowest: C1 > > > dev.cpu.1.cx_usage: 100.00% 0.00% 0.00% last 191us > > > > > > Since the cpufreq man page lists the inability to set the > > > frequency of different CPUs differently, perhaps this isn't a > > > bug at all? > > > > > > Cheers, > > > > > > > Does portion of 'devinfo -rv' similar to the snippet below show 'est' > > attached to both CPUs? > > <...> > > cpu0 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU0 > > ACPI I/O ports: > > 0x1014 > > 0x1015 > > acpi_perf0 > > acpi_throttle0 > > coretemp0 > > ==> est0 > > p4tcc0 > > cpufreq0 > > cpu1 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU1 > > ACPI I/O ports: > > 0x1014 > > 0x1015 > > acpi_perf1 > > acpi_throttle1 > > coretemp1 > > ==> est1 > > p4tcc1 > > cpufreq1 > > <...> > > Yes, but as you can see they are not nested under coretemp. devices: > > cpu0 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU0 > ACPI I/O ports: > 0x414 > 0x415 > acpi_perf0 > est0 > p4tcc0 > cpufreq0 > cpu1 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU1 > ACPI I/O ports: > 0x414 > 0x415 > acpi_perf1 > est1 > p4tcc1 > cpufreq1 > > This seems to be at odds with the dmesg and sysctl view of things? > > Cheers, >
I am sorry -- in the attempt to point them out, I have messed up the alignment -- they *should not* be nested under coretemp. It is strange that 'est' reported error on attach, yet seems to be attached to the device. This said, I am way out of my depth here -- hopefully someone smarter than I will chime in. -- Alexandre Kovalenko (Олександр Коваленко) -------------------------------------------------------------- Ovi Mail: Making email access easy http://mail.ovi.com _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"