John, investigations shew bug introduced between 2012.02.23.22.26.00
and 2012.02.23.22.26.30 in these files:
Edit src/sys/dev/acpica/acpi.c
Add delta 1.305.2.4 2012.02.23.22.26.14 jkim
Edit src/sys/dev/acpica/acpi_ec.c
Add delta 1.95.2.2 2012.02.23.22.26.14 jkim
Edit src/sys/dev/acpica/acpi_hpet.c
Add delta 1.38.2.2 2012.02.23.22.26.14 jkim
Edit src/sys/dev/acpica/acpi_timer.c
Add delta 1.50.2.3 2012.02.23.22.26.14 jkim
Edit src/sys/dev/acpica/acpivar.h
Add delta 1.125.2.4 2012.02.23.22.26.14 jkim
More details below. Let me know if I can do anything else. - H
* dmesg
Table 'FACP' at 0x77fd0200
Table 'APIC' at 0x77fd0390
APIC: Found table at 0x77fd0390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #19: Fri Mar 2 22:28:14 GMT 2012
t...@hydra.yewbarrow.net:/usr/obj/usr/src/sys/HYDRA amd64
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xffffffff80b6f000.
Calibrating TSC clock ... TSC clock: 2194794720 Hz
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2194.79-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40fb2 Family = f Model = 4b Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 2147483648 (2048 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000000b9e000 - 0x0000000074722fff, 1941458944 bytes (473989 pages)
avail memory = 1926897664 (1837 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <030107 APIC1519>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x001000-0x001fff at 0xffffff800020d000
x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf96d0 00014 (v00 ACPIAM)
ACPI: RSDT 0x77fd0000 00038 (v01 030107 RSDT1519 20070301 MSFT 00000097)
ACPI: FACP 0x77fd0200 00084 (v02 030107 FACP1519 20070301 MSFT 00000097)
ACPI: DSDT 0x77fd0430 044A0 (v01 1ADNC 1ADNCB33 00000B33 INTL 20051117)
ACPI: FACS 0x77fde000 00040
ACPI: APIC 0x77fd0390 0005C (v01 030107 APIC1519 20070301 MSFT 00000097)
ACPI: MCFG 0x77fd03f0 0003C (v01 030107 OEMMCFG 20070301 MSFT 00000097)
ACPI: OEMB 0x77fde040 00071 (v01 030107 OEMB1519 20070301 MSFT 00000097)
ACPI: HPET 0x77fd48d0 00038 (v01 030107 OEMHPET 20070301 MSFT 00000097)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
acpi0: <030107 RSDT1519> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 3 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fff80000, 80000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 77f00000 (3) failed
ACPI timer: 1/1 1/2 0/3 1/2 1/2 1/2 1/3 1/2 1/2 1/2 -> 9
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 7 10 11 12 14 15
Validation 0 3 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 4 N 0 3 4 5 7 10 11 12 14 15
Validation 0 4 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1002, dev=0x7910, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x7912, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x7917, revid=0x00
domain=0, bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x1002, dev=0x4380, revid=0x00
domain=0, bus=0, slot=18, func=0
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xb000, size 3, enabled
map[14]: type I/O Port, range 32, base 0xa000, size 2, enabled
map[18]: type I/O Port, range 32, base 0x9000, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x8000, size 2, enabled
map[20]: type I/O Port, range 32, base 0x7000, size 4, enabled
map[24]: type Memory, range 32, base 0xfe7ff800, size 10, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 22
found-> vendor=0x1002, dev=0x4387, revid=0x00
domain=0, bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0517, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[10]: type Memory, range 32, base 0xfe7fe000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 16
ohci early: SMM active, request owner change
found-> vendor=0x1002, dev=0x4388, revid=0x00
domain=0, bus=0, slot=19, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=3
map[10]: type Memory, range 32, base 0xfe7fd000, size 12, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
ohci early: SMM active, request owner change
found-> vendor=0x1002, dev=0x4389, revid=0x00
domain=0, bus=0, slot=19, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type Memory, range 32, base 0xfe7fc000, size 12, enabled
pcib0: matched entry for 0.19.INTC
pcib0: slot 19 INTC hardwired to IRQ 18
ohci early: SMM active, request owner change
found-> vendor=0x1002, dev=0x438a, revid=0x00
domain=0, bus=0, slot=19, func=3
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=3
map[10]: type Memory, range 32, base 0xfe7fb000, size 12, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
ohci early: SMM active, request owner change
found-> vendor=0x1002, dev=0x438b, revid=0x00
domain=0, bus=0, slot=19, func=4
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type Memory, range 32, base 0xfe7fa000, size 12, enabled
pcib0: matched entry for 0.19.INTC
pcib0: slot 19 INTC hardwired to IRQ 18
ohci early: SMM active, request owner change
found-> vendor=0x1002, dev=0x4386, revid=0x00
domain=0, bus=0, slot=19, func=5
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe7ff000, size 8, enabled
pcib0: matched entry for 0.19.INTD
pcib0: slot 19 INTD hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4385, revid=0x13
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0xb00, size 4, enabled
map[14]: type Memory, range 32, base 0xfed00000, size 10, enabled
found-> vendor=0x1002, dev=0x438c, revid=0x00
domain=0, bus=0, slot=20, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
MSI supports 1 message
map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled
found-> vendor=0x1002, dev=0x4383, revid=0x00
domain=0, bus=0, slot=20, func=2
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfe7f4000, size 14, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x438d, revid=0x00
domain=0, bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4384, revid=0x00
domain=0, bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xfe800000-0xfe9fffff
pcib1: prefetched decode 0xf0000000-0xf7ffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x791e, revid=0x00
domain=0, bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Prefetchable Memory, range 64, base 0xf0000000, size 27, e
nabled
pcib1: requested memory range 0xf0000000-0xf7ffffff: good
map[18]: type Memory, range 64, base 0xfe9f0000, size 16, enabled
pcib1: requested memory range 0xfe9f0000-0xfe9fffff: good
map[20]: type I/O Port, range 32, base 0xc000, size 8, enabled
pcib1: requested I/O range 0xc000-0xc0ff: in range
map[24]: type Memory, range 32, base 0xfe800000, size 20, enabled
pcib1: requested memory range 0xfe800000-0xfe8fffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 18
found-> vendor=0x1002, dev=0x7919, revid=0x00
domain=0, bus=1, slot=5, func=2
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfe9e8000, size 14, enabled
pcib1: requested memory range 0xfe9e8000-0xfe9ebfff: good
pcib1: matched entry for 1.5.INTB
pcib1: slot 5 INTB hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xf0000000-0xf7ffffff,0
xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1
pci1: <multimedia, HDA> at device 5.2 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfea00000-0xfeafffff
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x10ec, dev=0x8168, revid=0x01
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xd800, size 8, enabled
pcib2: requested I/O range 0xd800-0xd8ff: in range
map[18]: type Memory, range 64, base 0xfeaff000, size 12, enabled
pcib2: requested memory range 0xfeaff000-0xfeafffff: good
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 19
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd800-0xd8f
f mem 0xfeaff000-0xfeafffff irq 19 at device 0.0 on pci2
re0: MSI count : 2
re0: MSI-X count : 0
re0: attempting to allocate 1 MSI vectors (2 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 49
re0: using IRQ 256 for MSI
re0: Using 1 MSI message
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: OUI 0x00e04c, model 0x0011, rev. 2
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX
, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-
master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: bpf attached
re0: Ethernet address: 00:19:db:63:76:3e
ahci0: <ATI IXP600 AHCI SATA controller> port 0xb000-0xb007,0xa000-0xa003,0x9000
-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe7ff800-0xfe7ffbff irq 22 at device 1
8.0 on pci0
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 50
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahci0: Caps: 64bit NCQ SNTF MPS AL CLO 3Gbps PM PMD 32cmd CCC 4ports
ahci0: Caps2:
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps: HPCP
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: Caps: HPCP
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: Caps: HPCP
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: Caps: HPCP
ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at devic
e 19.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 51
usbus0: <OHCI (generic) USB controller> on ohci0
usbus0: bpf attached
ohci0: usbpf: Attached
ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 17 at devic
e 19.1 on pci0
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 52
usbus1: <OHCI (generic) USB controller> on ohci1
usbus1: bpf attached
ohci1: usbpf: Attached
ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at devic
e 19.2 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53
usbus2: <OHCI (generic) USB controller> on ohci2
usbus2: bpf attached
ohci2: usbpf: Attached
ohci3: <OHCI (generic) USB controller> mem 0xfe7fb000-0xfe7fbfff irq 17 at devic
e 19.3 on pci0
usbus3: <OHCI (generic) USB controller> on ohci3
usbus3: bpf attached
ohci3: usbpf: Attached
ohci4: <OHCI (generic) USB controller> mem 0xfe7fa000-0xfe7fafff irq 18 at devic
e 19.4 on pci0
usbus4: <OHCI (generic) USB controller> on ohci4
usbus4: bpf attached
ohci4: usbpf: Attached
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff irq 19 at d
evice 19.5 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54
ehci0: AMD SB600/700 quirk applied
ehci0: Dropped interrupts workaround enabled
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci0
usbus5: bpf attached
ehci0: usbpf: Attached
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xe000-0xefff
pcib3: memory decode 0xfeb00000-0xfebfffff
pcib3: no prefetched decode
pcib3: Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x1106, dev=0x3044, revid=0xc0
domain=0, bus=3, slot=0, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=4
powerspec 2 supports D0 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfebff800, size 11, enabled
pcib3: requested memory range 0xfebff800-0xfebfffff: good
map[14]: type I/O Port, range 32, base 0xe800, size 7, enabled
pcib3: requested I/O range 0xe800-0xe87f: in range
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 20
pci3: <serial bus, FireWire> at device 0.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 56
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.50
0000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet0 attach returned 12
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
acpi0: wakeup code va 0xffffff8087fae000 pa 0x4000
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
uart0 failed to probe at port 0x3f8 irq 4 on isa0
uart1 failed to probe at port 0x2f8 irq 3 on isa0
isa_probe_children: probing PnP devices
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: CLK_VAL field overlaps THT_EN bit
device_attach: acpi_throttle0 attach returned 6
powernow0: <PowerNow! K8> on cpu0
powernow0: STATUS: 0x310a120c0a0e020e
powernow0: STATUS: maxfid: 0x0e
powernow0: STATUS: maxvid: 0x0a
device_attach: powernow0 attach returned 6
powernow1: <PowerNow! K8> on cpu1
powernow1: STATUS: 0x310a120c0a0e020e
powernow1: STATUS: maxfid: 0x0e
powernow1: STATUS: maxvid: 0x0a
device_attach: powernow1 attach returned 6
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99761963 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ahcich0: AHCI reset...
ahcich0: SATA connect time=100us status=00000123
ahcich0: AHCI reset: device found
ahcich1: AHCI reset...
ahcich1: SATA connect time=100us status=00000123
ahcich1: AHCI reset: device found
ahcich2: AHCI reset...
ahcich2: SATA connect time=100us status=00000123
ahcich2: AHCI reset: device found
ahcich3: AHCI reset...
ahcich3: SATA connect time=100us status=00000123
ahcich3: AHCI reset: device found
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ahcich0: AHCI reset: device ready after 100ms
Expensive timeout(9) function: 0xffffffff802db3d0(0xfffffe00015abb00) 0.05421135
9 s
(aprobe0:ahcich0:0:15:0): Command timed out
(aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted
(aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
ahcich1: AHCI reset: device ready after 100ms
(aprobe1:ahcich1:0:15:0): Command timed out
(aprobe1:ahcich1:0:15:0): Error 5, Retries exhausted
(aprobe0:ahcich1:0:0:0): SIGNATURE: 0000
ahcich2: AHCI reset: device ready after 100ms
(aprobe2:ahcich2:0:15:0): Command timed out
(aprobe2:ahcich2:0:15:0): Error 5, Retries exhausted
(aprobe0:ahcich2:0:0:0): SIGNATURE: 0000
ahcich3: AHCI reset: device ready after 100ms
(aprobe3:ahcich3:0:15:0): Command timed out
(aprobe3:ahcich3:0:15:0): Error 5, Retries exhausted
(aprobe0:ahcich3:0:0:0): SIGNATURE: 0000
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x30000
(aprobe1:ata0:0:0:0): SIGNATURE: eb14
(aprobe0:ata0:0:1:0): SIGNATURE: eb14
pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
pass0: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device
pass0: Serial Number 6QF0W6RN
GEOM: new disk cd0
GEOM: new disk cd1
pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass0: Command Queueing enabled
(cd0:ata0:0:0:0): SCSI status error
(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata0:0:0:0): Error 6, Unretryable error
cd0 at ata0 bus 0 scbus4 target 0 lun 0
cd0: <LITE-ON CD-RW SOHR-5239V 2$0A> Removable CD-ROM SCSI-0 device
cd0: Serial Number 2005082900
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
pass1: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device
pass1: Serial Number W24044SM
pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass1: Command Queueing enabled
pass2 at ahcich2 bus 0 scbus2 target 0 lun 0
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray clos
ed)
(cd1:ata0:0:1:0): Error 6, Unretryable error
cd1 at ata0 bus 0 scbus4 target 1 lun 0
cd1: <ATAPI DVD D DH16D2P HP55> Removable CD-ROM SCSI-0 device
cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray c
losed
pass2: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device
pass2: Serial Number 6QF0ZTQM
pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass2: Command Queueing enabled
pass3 at ahcich3 bus 0 scbus3 target 0 lun 0
pass3: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device
pass3: Serial Number W240643V
pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass3: Command Queueing enabled
pass4 at ata0 bus 0 scbus4 target 0 lun 0
pass4: <LITE-ON CD-RW SOHR-5239V 2$0A> Removable CD-ROM SCSI-0 device
pass4: Serial Number 2005082900
pass4: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
(cd0:ata0:0:0:0): SCSI status error
(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata0:0:0:0): Error 6, Unretryable error
pass5 at ata0 bus 0 scbus4 target 1 lun 0
pass5: <ATAPI DVD D DH16D2P HP55> Removable CD-ROM SCSI-0 device
pass5: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device
ada0: Serial Number 6QF0W6RN
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device
ada1: Serial Number W24044SM
(cd0:ata0:0:0:0): SCSI status error
(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata0:0:0:0): Error 6, Unretryable error
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device
ada2: Serial Number 6QF0ZTQM
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device
(cd0:ata0:0:0:0): SCSI status error
(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata0:0:0:0): Error 6, Unretryable error
ada3: Serial Number W240643V
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad10
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
TSC timecounter discards lower 8 bit(s)
Timecounter "TSC-low" frequency 8573416 Hz quality -100
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray clos
ed)
(cd1:ata0:0:1:0): Error 6, Unretryable error
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray clos
ed)
(cd1:ata0:0:1:0): Error 6, Unretryable error
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray clos
ed)
(cd1:ata0:0:1:0): Error 6, Unretryable error
GEOM: new disk ada0
GEOM: new disk ada1
GEOM: new disk ada2
GEOM: new disk ada3
GEOM: ada2s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ada2s1: media size does not match label.
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
uhub5: 10 ports with 10 removable, self powered
Root mount waiting for: usbus5
Trying to mount root from ufs:/dev/ada0p2 [rw]...
start_init: trying /sbin/init
ugen1.2: <vendor 0x2222> at usbus1
ums0: <vendor 0x2222 Evoluent Vertical Mouse 2, class 0/0, rev 1.10/51.26, addr
2> on usbus1
ums0: 5 buttons and [XYZ] coordinates ID=0
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
* csup
--------------------------------------------------------------
>>> Running /usr/bin/csup
--------------------------------------------------------------
Parsing supfile "/root/csup/date-supfile"
Connecting to cvsup.uk.freebsd.org
Cannot connect to 2001:630:212:8:20e:cff:fe09:a69c: Protocol not supported
Connected to 131.111.8.41
Server software version: SNAP_16_1h
MD5 authentication started
MD5 authentication successful
Negotiating file attribute support
Exchanging collection information
Establishing multiplexed-mode data connection
Running
Updating collection src-all/cvs
Edit src/sys/dev/acpica/acpi.c
Add delta 1.305.2.4 2012.02.23.22.26.14 jkim
Edit src/sys/dev/acpica/acpi_ec.c
Add delta 1.95.2.2 2012.02.23.22.26.14 jkim
Edit src/sys/dev/acpica/acpi_hpet.c
Add delta 1.38.2.2 2012.02.23.22.26.14 jkim
Edit src/sys/dev/acpica/acpi_timer.c
Add delta 1.50.2.3 2012.02.23.22.26.14 jkim
Edit src/sys/dev/acpica/acpivar.h
Add delta 1.125.2.4 2012.02.23.22.26.14 jkim
Shutting down connection to server
Finished successfully
* supfil
*default host=cvsup.uk.freebsd.org
*default base=/var/db
*default prefix=/usr
*default release=cvs tag=RELENG_9
# ok:
# *default date=2012.02.23.22.26.00
# fail:
*default date=2012.02.23.22.26.30
*default delete use-rel-suffix
*default compress
src-all
* pciconf -lvb
hostb0@pci0:0:0:0: class=0x060000 card=0x79101002 chip=0x79101002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RS690 Host Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x79121002 chip=0x79121002 rev=0x00
hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'RS690 PCI to PCI Bridge (Internal gfx)'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:7:0: class=0x060400 card=0x79101002 chip=0x79171002 rev=0x00
hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'RS690 PCI to PCI Bridge (PCI Express Port 3)'
class = bridge
subclass = PCI-PCI
ahci0@pci0:0:18:0: class=0x010601 card=0x73291462 chip=0x43801002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 Non-Raid-5 SATA'
class = mass storage
subclass = SATA
bar [10] = type I/O Port, range 32, base 0xb000, size 8, enabled
bar [14] = type I/O Port, range 32, base 0xa000, size 4, enabled
bar [18] = type I/O Port, range 32, base 0x9000, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0x8000, size 4, enabled
bar [20] = type I/O Port, range 32, base 0x7000, size 16, enabled
bar [24] = type Memory, range 32, base 0xfe7ff800, size 1024, enabled
ohci0@pci0:0:19:0: class=0x0c0310 card=0x73271462 chip=0x43871002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 USB (OHCI0)'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfe7fe000, size 4096, enabled
ohci1@pci0:0:19:1: class=0x0c0310 card=0x73271462 chip=0x43881002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 USB (OHCI1)'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfe7fd000, size 4096, enabled
ohci2@pci0:0:19:2: class=0x0c0310 card=0x73271462 chip=0x43891002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 USB (OHCI2)'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfe7fc000, size 4096, enabled
ohci3@pci0:0:19:3: class=0x0c0310 card=0x73271462 chip=0x438a1002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 USB (OHCI3)'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfe7fb000, size 4096, enabled
ohci4@pci0:0:19:4: class=0x0c0310 card=0x73271462 chip=0x438b1002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 USB (OHCI4)'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfe7fa000, size 4096, enabled
ehci0@pci0:0:19:5: class=0x0c0320 card=0x73271462 chip=0x43861002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 USB Controller (EHCI)'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfe7ff000, size 256, enabled
none0@pci0:0:20:0: class=0x0c0500 card=0x73271462 chip=0x43851002 rev=0x13
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SBx00 SMBus Controller'
class = serial bus
subclass = SMBus
bar [10] = type I/O Port, range 32, base 0xb00, size 16, enabled
bar [14] = type Memory, range 32, base 0xfed00000, size 1024, enabled
atapci0@pci0:0:20:1: class=0x01018a card=0x73271462 chip=0x438c1002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 IDE'
class = mass storage
subclass = ATA
bar [20] = type I/O Port, range 32, base 0xff00, size 16, enabled
none1@pci0:0:20:2: class=0x040300 card=0x73271462 chip=0x43831002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SBx00 Azalia (Intel HDA)'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xfe7f4000, size 16384, enabled
isab0@pci0:0:20:3: class=0x060100 card=0x73271462 chip=0x438d1002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 PCI to LPC Bridge'
class = bridge
subclass = PCI-ISA
pcib3@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00
hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'SBx00 PCI to PCI Bridge'
class = bridge
subclass = PCI-PCI
hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'K8 [Athlon64/Opteron] Address Map'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'K8 [Athlon64/Opteron] DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'K8 [Athlon64/Opteron] Miscellaneous Control'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:1:5:0: class=0x030000 card=0x73271462 chip=0x791e1002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RS690 [Radeon X1200 Series]'
class = display
subclass = VGA
bar [10] = type Prefetchable Memory, range 64, base 0xf0000000, size 13421
7728, enabled
bar [18] = type Memory, range 64, base 0xfe9f0000, size 65536, enabled
bar [20] = type I/O Port, range 32, base 0xc000, size 256, enabled
bar [24] = type Memory, range 32, base 0xfe800000, size 1048576, enabled
none2@pci0:1:5:2: class=0x040300 card=0x79191002 chip=0x79191002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'Radeon X1200 Series Audio Controller'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xfe9e8000, size 16384, enabled
re0@pci0:2:0:0: class=0x020000 card=0x327c1462 chip=0x816810ec rev=0x01 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0xd800, size 256, enabled
bar [18] = type Memory, range 64, base 0xfeaff000, size 4096, enabled
none3@pci0:3:0:0: class=0x0c0010 card=0x086c0574 chip=0x30441106 rev=0xc0
hdr=0x00
vendor = 'VIA Technologies, Inc.'
device = 'VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller'
class = serial bus
subclass = FireWire
bar [10] = type Memory, range 32, base 0xfebff800, size 2048, enabled
bar [14] = type I/O Port, range 32, base 0xe800, size 128, enabled
On 29 February 2012 14:12, John Baldwin <j...@freebsd.org> wrote:
> On Tuesday, February 28, 2012 6:10:51 pm Harry Newton wrote:
>> Adrian - thanks !
>>
>> John, if you write me a shopping list of what information you think
>> useful, assuming you have time and inclination, I'll do my best
>> provide it.
>
> Mostly a verbose boot of 9.0-RELEASE and what you see now. If anything the
> only changes I can think of since the release are to make some of the PCI code
> more lenient. You could also try to narrow down exactly which revision causes
> the hang using a binary search of 9.0-STABLE since the release.
>
> --
> John Baldwin
--
Harry Newton
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
