Hi! You now officially have enough information to fill out a PR! Thankyou so very much for finding out which particular commit/commits caused this regression for you!
http://www.freebsd.org/send-pr.html Would you mind doing this? :) Thanks! Adrian On 2 March 2012 18:50, Harry Newton <h...@yewbarrow.net> wrote: > John, investigations shew bug introduced between 2012.02.23.22.26.00 > and 2012.02.23.22.26.30 in these files: > > Edit src/sys/dev/acpica/acpi.c > Add delta 1.305.2.4 2012.02.23.22.26.14 jkim > Edit src/sys/dev/acpica/acpi_ec.c > Add delta 1.95.2.2 2012.02.23.22.26.14 jkim > Edit src/sys/dev/acpica/acpi_hpet.c > Add delta 1.38.2.2 2012.02.23.22.26.14 jkim > Edit src/sys/dev/acpica/acpi_timer.c > Add delta 1.50.2.3 2012.02.23.22.26.14 jkim > Edit src/sys/dev/acpica/acpivar.h > Add delta 1.125.2.4 2012.02.23.22.26.14 jkim > > More details below. Let me know if I can do anything else. - H > > * dmesg > Table 'FACP' at 0x77fd0200 > Table 'APIC' at 0x77fd0390 > APIC: Found table at 0x77fd0390 > APIC: Using the MADT enumerator. > MADT: Found CPU APIC ID 0 ACPI ID 1: enabled > SMP: Added CPU 0 (AP) > MADT: Found CPU APIC ID 1 ACPI ID 2: enabled > SMP: Added CPU 1 (AP) > Copyright (c) 1992-2012 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 9.0-STABLE #19: Fri Mar 2 22:28:14 GMT 2012 > t...@hydra.yewbarrow.net:/usr/obj/usr/src/sys/HYDRA amd64 > WARNING: DIAGNOSTIC option enabled, expect reduced performance. > Preloaded elf kernel "/boot/kernel.old/kernel" at 0xffffffff80b6f000. > Calibrating TSC clock ... TSC clock: 2194794720 Hz > CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2194.79-MHz K8-class CPU) > Origin = "AuthenticAMD" Id = 0x40fb2 Family = f Model = 4b Stepping = 2 > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C > MOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=0x2001<SSE3,CX16> > AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> > AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> > L1 2MB data TLB: 8 entries, fully associative > L1 2MB instruction TLB: 8 entries, fully associative > L1 4KB data TLB: 32 entries, fully associative > L1 4KB instruction TLB: 32 entries, fully associative > L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > L2 2MB unified TLB: 0 entries, disabled/not present > L2 4KB data TLB: 512 entries, 4-way associative > L2 4KB instruction TLB: 512 entries, 4-way associative > L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative > real memory = 2147483648 (2048 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) > 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) > 0x0000000000b9e000 - 0x0000000074722fff, 1941458944 bytes (473989 pages) > avail memory = 1926897664 (1837 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: <030107 APIC1519> > INTR: Adding local APIC 1 as a target > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000 > x86bios: SSEG 0x001000-0x001fff at 0xffffff800020d000 > x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000 > x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000 > APIC: CPU 0 has ACPI ID 1 > APIC: CPU 1 has ACPI ID 2 > ULE: setup cpu 0 > ULE: setup cpu 1 > ACPI: RSDP 0xf96d0 00014 (v00 ACPIAM) > ACPI: RSDT 0x77fd0000 00038 (v01 030107 RSDT1519 20070301 MSFT 00000097) > ACPI: FACP 0x77fd0200 00084 (v02 030107 FACP1519 20070301 MSFT 00000097) > ACPI: DSDT 0x77fd0430 044A0 (v01 1ADNC 1ADNCB33 00000B33 INTL 20051117) > ACPI: FACS 0x77fde000 00040 > ACPI: APIC 0x77fd0390 0005C (v01 030107 APIC1519 20070301 MSFT 00000097) > ACPI: MCFG 0x77fd03f0 0003C (v01 030107 OEMMCFG 20070301 MSFT 00000097) > ACPI: OEMB 0x77fde040 00071 (v01 030107 OEMB1519 20070301 MSFT 00000097) > ACPI: HPET 0x77fd48d0 00038 (v01 030107 OEMHPET 20070301 MSFT 00000097) > MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 > ioapic0: Routing external 8259A's -> intpin 0 > MADT: Interrupt override: source 0, irq 2 > ioapic0: Routing IRQ 0 -> intpin 2 > MADT: Interrupt override: source 9, irq 9 > ioapic0: intpin 9 trigger: level > ioapic0: intpin 9 polarity: low > ioapic0 <Version 2.1> irqs 0-23 on motherboard > cpu0 BSP: > ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > null: <null device, zero device> > random: <entropy source, Software, Yarrow> > io: <I/O> > nfslock: pseudo-device > kbd: new array size 4 > kbd1 at kbdmux0 > mem: <memory> > acpi0: <030107 RSDT1519> on motherboard > PCIe: Memory Mapped configuration base @ 0xe0000000 > ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 > ACPI: Executed 3 blocks of module-level executable AML code > acpi0: Power Button (fixed) > acpi0: reservation of fee00000, 1000 (3) failed > acpi0: reservation of ffb80000, 80000 (3) failed > acpi0: reservation of fff80000, 80000 (3) failed > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, 77f00000 (3) failed > ACPI timer: 1/1 1/2 0/3 1/2 1/2 1/2 1/3 1/2 1/2 1/2 -> 9 > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu0: switching to generic Cx mode > cpu1: <ACPI CPU> on acpi0 > pci_link0: Index IRQ Rtd Ref IRQs > Initial Probe 0 5 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 5 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link1: Index IRQ Rtd Ref IRQs > Initial Probe 0 3 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 3 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link2: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 10 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link3: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 10 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link4: Index IRQ Rtd Ref IRQs > Initial Probe 0 4 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 4 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link5: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link6: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 11 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pci_link7: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 > Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: domain=0, physical bus=0 > found-> vendor=0x1002, dev=0x7910, revid=0x00 > domain=0, bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1002, dev=0x7912, revid=0x00 > domain=0, bus=0, slot=1, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1002, dev=0x7917, revid=0x00 > domain=0, bus=0, slot=7, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > found-> vendor=0x1002, dev=0x4380, revid=0x00 > domain=0, bus=0, slot=18, func=0 > class=01-06-01, hdrtype=0x00, mfdev=0 > cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D3 current D0 > map[10]: type I/O Port, range 32, base 0xb000, size 3, enabled > map[14]: type I/O Port, range 32, base 0xa000, size 2, enabled > map[18]: type I/O Port, range 32, base 0x9000, size 3, enabled > map[1c]: type I/O Port, range 32, base 0x8000, size 2, enabled > map[20]: type I/O Port, range 32, base 0x7000, size 4, enabled > map[24]: type Memory, range 32, base 0xfe7ff800, size 10, enabled > pcib0: matched entry for 0.18.INTA > pcib0: slot 18 INTA hardwired to IRQ 22 > found-> vendor=0x1002, dev=0x4387, revid=0x00 > domain=0, bus=0, slot=19, func=0 > class=0c-03-10, hdrtype=0x00, mfdev=1 > cmdreg=0x0517, statreg=0x02a0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=5 > map[10]: type Memory, range 32, base 0xfe7fe000, size 12, enabled > pcib0: matched entry for 0.19.INTA > pcib0: slot 19 INTA hardwired to IRQ 16 > ohci early: SMM active, request owner change > found-> vendor=0x1002, dev=0x4388, revid=0x00 > domain=0, bus=0, slot=19, func=1 > class=0c-03-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=3 > map[10]: type Memory, range 32, base 0xfe7fd000, size 12, enabled > pcib0: matched entry for 0.19.INTB > pcib0: slot 19 INTB hardwired to IRQ 17 > ohci early: SMM active, request owner change > found-> vendor=0x1002, dev=0x4389, revid=0x00 > domain=0, bus=0, slot=19, func=2 > class=0c-03-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=c, irq=10 > map[10]: type Memory, range 32, base 0xfe7fc000, size 12, enabled > pcib0: matched entry for 0.19.INTC > pcib0: slot 19 INTC hardwired to IRQ 18 > ohci early: SMM active, request owner change > found-> vendor=0x1002, dev=0x438a, revid=0x00 > domain=0, bus=0, slot=19, func=3 > class=0c-03-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=3 > map[10]: type Memory, range 32, base 0xfe7fb000, size 12, enabled > pcib0: matched entry for 0.19.INTB > pcib0: slot 19 INTB hardwired to IRQ 17 > ohci early: SMM active, request owner change > found-> vendor=0x1002, dev=0x438b, revid=0x00 > domain=0, bus=0, slot=19, func=4 > class=0c-03-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=c, irq=10 > map[10]: type Memory, range 32, base 0xfe7fa000, size 12, enabled > pcib0: matched entry for 0.19.INTC > pcib0: slot 19 INTC hardwired to IRQ 18 > ohci early: SMM active, request owner change > found-> vendor=0x1002, dev=0x4386, revid=0x00 > domain=0, bus=0, slot=19, func=5 > class=0c-03-20, hdrtype=0x00, mfdev=0 > cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=d, irq=10 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type Memory, range 32, base 0xfe7ff000, size 8, enabled > pcib0: matched entry for 0.19.INTD > pcib0: slot 19 INTD hardwired to IRQ 19 > found-> vendor=0x1002, dev=0x4385, revid=0x13 > domain=0, bus=0, slot=20, func=0 > class=0c-05-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[10]: type I/O Port, range 32, base 0xb00, size 4, enabled > map[14]: type Memory, range 32, base 0xfed00000, size 10, enabled > found-> vendor=0x1002, dev=0x438c, revid=0x00 > domain=0, bus=0, slot=20, func=1 > class=01-01-8a, hdrtype=0x00, mfdev=0 > cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=255 > MSI supports 1 message > map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled > found-> vendor=0x1002, dev=0x4383, revid=0x00 > domain=0, bus=0, slot=20, func=2 > class=04-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=5 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 64, base 0xfe7f4000, size 14, enabled > pcib0: matched entry for 0.20.INTA > pcib0: slot 20 INTA hardwired to IRQ 16 > found-> vendor=0x1002, dev=0x438d, revid=0x00 > domain=0, bus=0, slot=20, func=3 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1002, dev=0x4384, revid=0x00 > domain=0, bus=0, slot=20, func=4 > class=06-04-01, hdrtype=0x01, mfdev=1 > cmdreg=0x0107, statreg=0x02a0, cachelnsz=0 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1100, revid=0x00 > domain=0, bus=0, slot=24, func=0 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1101, revid=0x00 > domain=0, bus=0, slot=24, func=1 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1102, revid=0x00 > domain=0, bus=0, slot=24, func=2 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1022, dev=0x1103, revid=0x00 > domain=0, bus=0, slot=24, func=3 > class=06-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pcib1: domain 0 > pcib1: secondary bus 1 > pcib1: subordinate bus 1 > pcib1: I/O decode 0xc000-0xcfff > pcib1: memory decode 0xfe800000-0xfe9fffff > pcib1: prefetched decode 0xf0000000-0xf7ffffff > pci1: <ACPI PCI bus> on pcib1 > pci1: domain=0, physical bus=1 > found-> vendor=0x1002, dev=0x791e, revid=0x00 > domain=0, bus=1, slot=5, func=0 > class=03-00-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D1 D2 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Prefetchable Memory, range 64, base 0xf0000000, size 27, > e > nabled > pcib1: requested memory range 0xf0000000-0xf7ffffff: good > map[18]: type Memory, range 64, base 0xfe9f0000, size 16, enabled > pcib1: requested memory range 0xfe9f0000-0xfe9fffff: good > map[20]: type I/O Port, range 32, base 0xc000, size 8, enabled > pcib1: requested I/O range 0xc000-0xc0ff: in range > map[24]: type Memory, range 32, base 0xfe800000, size 20, enabled > pcib1: requested memory range 0xfe800000-0xfe8fffff: good > pcib1: matched entry for 1.5.INTA > pcib1: slot 5 INTA hardwired to IRQ 18 > found-> vendor=0x1002, dev=0x7919, revid=0x00 > domain=0, bus=1, slot=5, func=2 > class=04-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 64, base 0xfe9e8000, size 14, enabled > pcib1: requested memory range 0xfe9e8000-0xfe9ebfff: good > pcib1: matched entry for 1.5.INTB > pcib1: slot 5 INTB hardwired to IRQ 19 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem > 0xf0000000-0xf7ffffff,0 > xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1 > pci1: <multimedia, HDA> at device 5.2 (no driver attached) > pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 > pcib2: domain 0 > pcib2: secondary bus 2 > pcib2: subordinate bus 2 > pcib2: I/O decode 0xd000-0xdfff > pcib2: memory decode 0xfea00000-0xfeafffff > pcib2: no prefetched decode > pci2: <ACPI PCI bus> on pcib2 > pci2: domain=0, physical bus=2 > found-> vendor=0x10ec, dev=0x8168, revid=0x01 > domain=0, bus=2, slot=0, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D1 D2 D3 current D0 > MSI supports 2 messages, 64 bit > map[10]: type I/O Port, range 32, base 0xd800, size 8, enabled > pcib2: requested I/O range 0xd800-0xd8ff: in range > map[18]: type Memory, range 64, base 0xfeaff000, size 12, enabled > pcib2: requested memory range 0xfeaff000-0xfeafffff: good > pcib2: matched entry for 2.0.INTA > pcib2: slot 0 INTA hardwired to IRQ 19 > re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port > 0xd800-0xd8f > f mem 0xfeaff000-0xfeafffff irq 19 at device 0.0 on pci2 > re0: MSI count : 2 > re0: MSI-X count : 0 > re0: attempting to allocate 1 MSI vectors (2 supported) > msi: routing MSI IRQ 256 to local APIC 0 vector 49 > re0: using IRQ 256 for MSI > re0: Using 1 MSI message > re0: Chip rev. 0x38000000 > re0: MAC rev. 0x00000000 > miibus0: <MII bus> on re0 > rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 > rgephy0: OUI 0x00e04c, model 0x0011, rev. 2 > rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, > 100baseTX-FDX > , 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, > 1000baseT-FDX- > master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow > re0: bpf attached > re0: Ethernet address: 00:19:db:63:76:3e > ahci0: <ATI IXP600 AHCI SATA controller> port > 0xb000-0xb007,0xa000-0xa003,0x9000 > -0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe7ff800-0xfe7ffbff irq 22 at > device 1 > 8.0 on pci0 > ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 50 > ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported > ahci0: Caps: 64bit NCQ SNTF MPS AL CLO 3Gbps PM PMD 32cmd CCC 4ports > ahci0: Caps2: > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich0: Caps: HPCP > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich1: Caps: HPCP > ahcich2: <AHCI channel> at channel 2 on ahci0 > ahcich2: Caps: HPCP > ahcich3: <AHCI channel> at channel 3 on ahci0 > ahcich3: Caps: HPCP > ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at > devic > e 19.0 on pci0 > ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 51 > usbus0: <OHCI (generic) USB controller> on ohci0 > usbus0: bpf attached > ohci0: usbpf: Attached > ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 17 at > devic > e 19.1 on pci0 > ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 52 > usbus1: <OHCI (generic) USB controller> on ohci1 > usbus1: bpf attached > ohci1: usbpf: Attached > ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at > devic > e 19.2 on pci0 > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53 > usbus2: <OHCI (generic) USB controller> on ohci2 > usbus2: bpf attached > ohci2: usbpf: Attached > ohci3: <OHCI (generic) USB controller> mem 0xfe7fb000-0xfe7fbfff irq 17 at > devic > e 19.3 on pci0 > usbus3: <OHCI (generic) USB controller> on ohci3 > usbus3: bpf attached > ohci3: usbpf: Attached > ohci4: <OHCI (generic) USB controller> mem 0xfe7fa000-0xfe7fafff irq 18 at > devic > e 19.4 on pci0 > usbus4: <OHCI (generic) USB controller> on ohci4 > usbus4: bpf attached > ohci4: usbpf: Attached > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff irq 19 > at d > evice 19.5 on pci0 > ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54 > ehci0: AMD SB600/700 quirk applied > ehci0: Dropped interrupts workaround enabled > usbus5: EHCI version 1.0 > usbus5: <EHCI (generic) USB 2.0 controller> on ehci0 > usbus5: bpf attached > ehci0: usbpf: Attached > pci0: <serial bus, SMBus> at device 20.0 (no driver attached) > atapci0: <ATI IXP600 UDMA133 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37 > 6,0xff00-0xff0f at device 20.1 on pci0 > ata0: <ATA channel> at channel 0 on atapci0 > ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55 > pci0: <multimedia, HDA> at device 20.2 (no driver attached) > isab0: <PCI-ISA bridge> at device 20.3 on pci0 > isa0: <ISA bus> on isab0 > pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 > pcib3: domain 0 > pcib3: secondary bus 3 > pcib3: subordinate bus 3 > pcib3: I/O decode 0xe000-0xefff > pcib3: memory decode 0xfeb00000-0xfebfffff > pcib3: no prefetched decode > pcib3: Subtractively decoded bridge. > pci3: <ACPI PCI bus> on pcib3 > pci3: domain=0, physical bus=3 > found-> vendor=0x1106, dev=0x3044, revid=0xc0 > domain=0, bus=3, slot=0, func=0 > class=0c-00-10, hdrtype=0x00, mfdev=0 > cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords) > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) > intpin=a, irq=4 > powerspec 2 supports D0 D2 D3 current D0 > map[10]: type Memory, range 32, base 0xfebff800, size 11, enabled > pcib3: requested memory range 0xfebff800-0xfebfffff: good > map[14]: type I/O Port, range 32, base 0xe800, size 7, enabled > pcib3: requested I/O range 0xe800-0xe87f: in range > pcib3: matched entry for 3.0.INTA > pcib3: slot 0 INTA hardwired to IRQ 20 > pci3: <serial bus, FireWire> at device 0.0 (no driver attached) > acpi_button0: <Power Button> on acpi0 > attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 56 > Event timer "i8254" frequency 1193182 Hz quality 100 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment > 0.50 > 0000000s) > ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57 > Event timer "RTC" frequency 32768 Hz quality 0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > device_attach: hpet0 attach returned 12 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0065 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 > atkbd0: [GIANT-LOCKED] > psm0: unable to allocate IRQ > acpi0: wakeup code va 0xffffff8087fae000 pa 0x4000 > isa_probe_children: disabling PnP devices > atkbdc: atkbdc0 already exists; skipping it > atrtc: atrtc0 already exists; skipping it > attimer: attimer0 already exists; skipping it > sc: sc0 already exists; skipping it > isa_probe_children: probing non-PnP devices > orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 > ppc0 failed to probe at irq 7 on isa0 > uart0 failed to probe at port 0x3f8 irq 4 on isa0 > uart1 failed to probe at port 0x2f8 irq 3 on isa0 > isa_probe_children: probing PnP devices > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > acpi_throttle0: CLK_VAL field overlaps THT_EN bit > device_attach: acpi_throttle0 attach returned 6 > powernow0: <PowerNow! K8> on cpu0 > powernow0: STATUS: 0x310a120c0a0e020e > powernow0: STATUS: maxfid: 0x0e > powernow0: STATUS: maxvid: 0x0a > device_attach: powernow0 attach returned 6 > powernow1: <PowerNow! K8> on cpu1 > powernow1: STATUS: 0x310a120c0a0e020e > powernow1: STATUS: maxfid: 0x0e > powernow1: STATUS: maxvid: 0x0a > device_attach: powernow1 attach returned 6 > Device configuration finished. > procfs registered > lapic: Divisor 2, Frequency 99761963 Hz > Timecounters tick every 1.000 msec > vlan: initialized, using hash tables with chaining > lo0: bpf attached > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > usbus3: 12Mbps Full Speed USB v1.0 > usbus4: 12Mbps Full Speed USB v1.0 > usbus5: 480Mbps High Speed USB v2.0 > ahcich0: AHCI reset... > ahcich0: SATA connect time=100us status=00000123 > ahcich0: AHCI reset: device found > ahcich1: AHCI reset... > ahcich1: SATA connect time=100us status=00000123 > ahcich1: AHCI reset: device found > ahcich2: AHCI reset... > ahcich2: SATA connect time=100us status=00000123 > ahcich2: AHCI reset: device found > ahcich3: AHCI reset... > ahcich3: SATA connect time=100us status=00000123 > ahcich3: AHCI reset: device found > ugen0.1: <ATI> at usbus0 > uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > ugen1.1: <ATI> at usbus1 > uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1: <ATI> at usbus2 > uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > ugen3.1: <ATI> at usbus3 > uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 > ugen4.1: <ATI> at usbus4 > uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 > ugen5.1: <ATI> at usbus5 > uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 > ata0: reset tp1 mask=03 ostat0=50 ostat1=50 > ahcich0: AHCI reset: device ready after 100ms > Expensive timeout(9) function: 0xffffffff802db3d0(0xfffffe00015abb00) > 0.05421135 > 9 s > (aprobe0:ahcich0:0:15:0): Command timed out > (aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted > (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000 > ahcich1: AHCI reset: device ready after 100ms > (aprobe1:ahcich1:0:15:0): Command timed out > (aprobe1:ahcich1:0:15:0): Error 5, Retries exhausted > (aprobe0:ahcich1:0:0:0): SIGNATURE: 0000 > ahcich2: AHCI reset: device ready after 100ms > (aprobe2:ahcich2:0:15:0): Command timed out > (aprobe2:ahcich2:0:15:0): Error 5, Retries exhausted > (aprobe0:ahcich2:0:0:0): SIGNATURE: 0000 > ahcich3: AHCI reset: device ready after 100ms > (aprobe3:ahcich3:0:15:0): Command timed out > (aprobe3:ahcich3:0:15:0): Error 5, Retries exhausted > (aprobe0:ahcich3:0:0:0): SIGNATURE: 0000 > ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb > ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb > ata0: reset tp2 stat0=00 stat1=00 devices=0x30000 > (aprobe1:ata0:0:0:0): SIGNATURE: eb14 > (aprobe0:ata0:0:1:0): SIGNATURE: eb14 > pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 > pass0: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device > pass0: Serial Number 6QF0W6RN > GEOM: new disk cd0 > GEOM: new disk cd1 > pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > pass0: Command Queueing enabled > (cd0:ata0:0:0:0): SCSI status error > (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (cd0:ata0:0:0:0): CAM status: SCSI Status Error > (cd0:ata0:0:0:0): SCSI status: Check Condition > (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) > (cd0:ata0:0:0:0): Error 6, Unretryable error > cd0 at ata0 bus 0 scbus4 target 0 lun 0 > cd0: <LITE-ON CD-RW SOHR-5239V 2$0A> Removable CD-ROM SCSI-0 device > cd0: Serial Number 2005082900 > cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present > pass1 at ahcich1 bus 0 scbus1 target 0 lun 0 > pass1: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device > pass1: Serial Number W24044SM > pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > pass1: Command Queueing enabled > pass2 at ahcich2 bus 0 scbus2 target 0 lun 0 > (cd1:ata0:0:1:0): SCSI status error > (cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (cd1:ata0:0:1:0): CAM status: SCSI Status Error > (cd1:ata0:0:1:0): SCSI status: Check Condition > (cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray > clos > ed) > (cd1:ata0:0:1:0): Error 6, Unretryable error > cd1 at ata0 bus 0 scbus4 target 1 lun 0 > cd1: <ATAPI DVD D DH16D2P HP55> Removable CD-ROM SCSI-0 device > cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) > cd1: Attempt to query device size failed: NOT READY, Medium not present - > tray c > losed > pass2: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device > pass2: Serial Number 6QF0ZTQM > pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > pass2: Command Queueing enabled > pass3 at ahcich3 bus 0 scbus3 target 0 lun 0 > pass3: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device > pass3: Serial Number W240643V > pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > pass3: Command Queueing enabled > pass4 at ata0 bus 0 scbus4 target 0 lun 0 > pass4: <LITE-ON CD-RW SOHR-5239V 2$0A> Removable CD-ROM SCSI-0 device > pass4: Serial Number 2005082900 > pass4: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) > (cd0:ata0:0:0:0): SCSI status error > (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (cd0:ata0:0:0:0): CAM status: SCSI Status Error > (cd0:ata0:0:0:0): SCSI status: Check Condition > (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) > (cd0:ata0:0:0:0): Error 6, Unretryable error > pass5 at ata0 bus 0 scbus4 target 1 lun 0 > pass5: <ATAPI DVD D DH16D2P HP55> Removable CD-ROM SCSI-0 device > pass5: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > ada0: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device > ada0: Serial Number 6QF0W6RN > ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad4 > ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 > ada1: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device > ada1: Serial Number W24044SM > (cd0:ata0:0:0:0): SCSI status error > (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (cd0:ata0:0:0:0): CAM status: SCSI Status Error > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > uhub3: 2 ports with 2 removable, self powered > uhub4: 2 ports with 2 removable, self powered > (cd0:ata0:0:0:0): SCSI status: Check Condition > (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) > (cd0:ata0:0:0:0): Error 6, Unretryable error > ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada1: Command Queueing enabled > ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) > ada1: Previously was known as ad6 > ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 > ada2: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device > ada2: Serial Number 6QF0ZTQM > ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada2: Command Queueing enabled > ada2: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C) > ada2: Previously was known as ad8 > ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 > ada3: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device > (cd0:ata0:0:0:0): SCSI status error > (cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (cd0:ata0:0:0:0): CAM status: SCSI Status Error > (cd0:ata0:0:0:0): SCSI status: Check Condition > (cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) > (cd0:ata0:0:0:0): Error 6, Unretryable error > ada3: Serial Number W240643V > ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada3: Command Queueing enabled > ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) > ada3: Previously was known as ad10 > SMP: AP CPU #1 Launched! > cpu1 AP: > ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > TSC timecounter discards lower 8 bit(s) > Timecounter "TSC-low" frequency 8573416 Hz quality -100 > WARNING: DIAGNOSTIC option enabled, expect reduced performance. > (cd1:ata0:0:1:0): SCSI status error > (cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (cd1:ata0:0:1:0): CAM status: SCSI Status Error > (cd1:ata0:0:1:0): SCSI status: Check Condition > (cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray > clos > ed) > (cd1:ata0:0:1:0): Error 6, Unretryable error > (cd1:ata0:0:1:0): SCSI status error > (cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (cd1:ata0:0:1:0): CAM status: SCSI Status Error > (cd1:ata0:0:1:0): SCSI status: Check Condition > (cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray > clos > ed) > (cd1:ata0:0:1:0): Error 6, Unretryable error > (cd1:ata0:0:1:0): SCSI status error > (cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (cd1:ata0:0:1:0): CAM status: SCSI Status Error > (cd1:ata0:0:1:0): SCSI status: Check Condition > (cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray > clos > ed) > (cd1:ata0:0:1:0): Error 6, Unretryable error > GEOM: new disk ada0 > GEOM: new disk ada1 > GEOM: new disk ada2 > GEOM: new disk ada3 > GEOM: ada2s1: geometry does not match label (255h,63s != 16h,63s). > GEOM: ada2s1: media size does not match label. > Root mount waiting for: usbus5 > Root mount waiting for: usbus5 > Root mount waiting for: usbus5 > uhub5: 10 ports with 10 removable, self powered > Root mount waiting for: usbus5 > Trying to mount root from ufs:/dev/ada0p2 [rw]... > start_init: trying /sbin/init > ugen1.2: <vendor 0x2222> at usbus1 > ums0: <vendor 0x2222 Evoluent Vertical Mouse 2, class 0/0, rev 1.10/51.26, > addr > 2> on usbus1 > ums0: 5 buttons and [XYZ] coordinates ID=0 > ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is > present; > to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. > ZFS filesystem version 5 > ZFS storage pool version 28 > * csup > -------------------------------------------------------------- >>>> Running /usr/bin/csup > -------------------------------------------------------------- > Parsing supfile "/root/csup/date-supfile" > Connecting to cvsup.uk.freebsd.org > Cannot connect to 2001:630:212:8:20e:cff:fe09:a69c: Protocol not supported > Connected to 131.111.8.41 > Server software version: SNAP_16_1h > MD5 authentication started > MD5 authentication successful > Negotiating file attribute support > Exchanging collection information > Establishing multiplexed-mode data connection > Running > Updating collection src-all/cvs > Edit src/sys/dev/acpica/acpi.c > Add delta 1.305.2.4 2012.02.23.22.26.14 jkim > Edit src/sys/dev/acpica/acpi_ec.c > Add delta 1.95.2.2 2012.02.23.22.26.14 jkim > Edit src/sys/dev/acpica/acpi_hpet.c > Add delta 1.38.2.2 2012.02.23.22.26.14 jkim > Edit src/sys/dev/acpica/acpi_timer.c > Add delta 1.50.2.3 2012.02.23.22.26.14 jkim > Edit src/sys/dev/acpica/acpivar.h > Add delta 1.125.2.4 2012.02.23.22.26.14 jkim > Shutting down connection to server > Finished successfully > * supfil > *default host=cvsup.uk.freebsd.org > *default base=/var/db > *default prefix=/usr > *default release=cvs tag=RELENG_9 > > # ok: > # *default date=2012.02.23.22.26.00 > # fail: > *default date=2012.02.23.22.26.30 > > *default delete use-rel-suffix > *default compress > src-all > * pciconf -lvb > hostb0@pci0:0:0:0: class=0x060000 card=0x79101002 chip=0x79101002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'RS690 Host Bridge' > class = bridge > subclass = HOST-PCI > pcib1@pci0:0:1:0: class=0x060400 card=0x79121002 chip=0x79121002 > rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc' > device = 'RS690 PCI to PCI Bridge (Internal gfx)' > class = bridge > subclass = PCI-PCI > pcib2@pci0:0:7:0: class=0x060400 card=0x79101002 chip=0x79171002 > rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc' > device = 'RS690 PCI to PCI Bridge (PCI Express Port 3)' > class = bridge > subclass = PCI-PCI > ahci0@pci0:0:18:0: class=0x010601 card=0x73291462 chip=0x43801002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'SB600 Non-Raid-5 SATA' > class = mass storage > subclass = SATA > bar [10] = type I/O Port, range 32, base 0xb000, size 8, enabled > bar [14] = type I/O Port, range 32, base 0xa000, size 4, enabled > bar [18] = type I/O Port, range 32, base 0x9000, size 8, enabled > bar [1c] = type I/O Port, range 32, base 0x8000, size 4, enabled > bar [20] = type I/O Port, range 32, base 0x7000, size 16, enabled > bar [24] = type Memory, range 32, base 0xfe7ff800, size 1024, enabled > ohci0@pci0:0:19:0: class=0x0c0310 card=0x73271462 chip=0x43871002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'SB600 USB (OHCI0)' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xfe7fe000, size 4096, enabled > ohci1@pci0:0:19:1: class=0x0c0310 card=0x73271462 chip=0x43881002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'SB600 USB (OHCI1)' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xfe7fd000, size 4096, enabled > ohci2@pci0:0:19:2: class=0x0c0310 card=0x73271462 chip=0x43891002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'SB600 USB (OHCI2)' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xfe7fc000, size 4096, enabled > ohci3@pci0:0:19:3: class=0x0c0310 card=0x73271462 chip=0x438a1002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'SB600 USB (OHCI3)' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xfe7fb000, size 4096, enabled > ohci4@pci0:0:19:4: class=0x0c0310 card=0x73271462 chip=0x438b1002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'SB600 USB (OHCI4)' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xfe7fa000, size 4096, enabled > ehci0@pci0:0:19:5: class=0x0c0320 card=0x73271462 chip=0x43861002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'SB600 USB Controller (EHCI)' > class = serial bus > subclass = USB > bar [10] = type Memory, range 32, base 0xfe7ff000, size 256, enabled > none0@pci0:0:20:0: class=0x0c0500 card=0x73271462 chip=0x43851002 > rev=0x13 > hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'SBx00 SMBus Controller' > class = serial bus > subclass = SMBus > bar [10] = type I/O Port, range 32, base 0xb00, size 16, enabled > bar [14] = type Memory, range 32, base 0xfed00000, size 1024, enabled > atapci0@pci0:0:20:1: class=0x01018a card=0x73271462 chip=0x438c1002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'SB600 IDE' > class = mass storage > subclass = ATA > bar [20] = type I/O Port, range 32, base 0xff00, size 16, enabled > none1@pci0:0:20:2: class=0x040300 card=0x73271462 chip=0x43831002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'SBx00 Azalia (Intel HDA)' > class = multimedia > subclass = HDA > bar [10] = type Memory, range 64, base 0xfe7f4000, size 16384, enabled > isab0@pci0:0:20:3: class=0x060100 card=0x73271462 chip=0x438d1002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'SB600 PCI to LPC Bridge' > class = bridge > subclass = PCI-ISA > pcib3@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 > rev=0x00 > hdr=0x01 > vendor = 'ATI Technologies Inc' > device = 'SBx00 PCI to PCI Bridge' > class = bridge > subclass = PCI-PCI > hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 > rev=0x00 > hdr=0x00 > vendor = 'Advanced Micro Devices [AMD]' > device = 'K8 [Athlon64/Opteron] HyperTransport Technology > Configuration' > > class = bridge > subclass = HOST-PCI > hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 > rev=0x00 > hdr=0x00 > vendor = 'Advanced Micro Devices [AMD]' > device = 'K8 [Athlon64/Opteron] Address Map' > class = bridge > subclass = HOST-PCI > hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 > rev=0x00 > hdr=0x00 > vendor = 'Advanced Micro Devices [AMD]' > device = 'K8 [Athlon64/Opteron] DRAM Controller' > class = bridge > subclass = HOST-PCI > hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 > rev=0x00 > hdr=0x00 > vendor = 'Advanced Micro Devices [AMD]' > device = 'K8 [Athlon64/Opteron] Miscellaneous Control' > class = bridge > subclass = HOST-PCI > vgapci0@pci0:1:5:0: class=0x030000 card=0x73271462 chip=0x791e1002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'RS690 [Radeon X1200 Series]' > class = display > subclass = VGA > bar [10] = type Prefetchable Memory, range 64, base 0xf0000000, size > 13421 > 7728, enabled > bar [18] = type Memory, range 64, base 0xfe9f0000, size 65536, enabled > bar [20] = type I/O Port, range 32, base 0xc000, size 256, enabled > bar [24] = type Memory, range 32, base 0xfe800000, size 1048576, enabled > none2@pci0:1:5:2: class=0x040300 card=0x79191002 chip=0x79191002 > rev=0x00 > hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'Radeon X1200 Series Audio Controller' > class = multimedia > subclass = HDA > bar [10] = type Memory, range 64, base 0xfe9e8000, size 16384, enabled > re0@pci0:2:0:0: class=0x020000 card=0x327c1462 chip=0x816810ec rev=0x01 > hdr=0x00 > > vendor = 'Realtek Semiconductor Co., Ltd.' > device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' > class = network > subclass = ethernet > bar [10] = type I/O Port, range 32, base 0xd800, size 256, enabled > bar [18] = type Memory, range 64, base 0xfeaff000, size 4096, enabled > none3@pci0:3:0:0: class=0x0c0010 card=0x086c0574 chip=0x30441106 > rev=0xc0 > hdr=0x00 > vendor = 'VIA Technologies, Inc.' > device = 'VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller' > class = serial bus > subclass = FireWire > bar [10] = type Memory, range 32, base 0xfebff800, size 2048, enabled > bar [14] = type I/O Port, range 32, base 0xe800, size 128, enabled > > > > On 29 February 2012 14:12, John Baldwin <j...@freebsd.org> wrote: >> On Tuesday, February 28, 2012 6:10:51 pm Harry Newton wrote: >>> Adrian - thanks ! >>> >>> John, if you write me a shopping list of what information you think >>> useful, assuming you have time and inclination, I'll do my best >>> provide it. >> >> Mostly a verbose boot of 9.0-RELEASE and what you see now. If anything the >> only changes I can think of since the release are to make some of the PCI >> code >> more lenient. You could also try to narrow down exactly which revision >> causes >> the hang using a binary search of 9.0-STABLE since the release. >> >> -- >> John Baldwin > > > > -- > Harry Newton _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
