On Friday, March 30, 2012 12:06:40 am Jan Mikkelsen wrote: > Hi, > > I have a loan LSI MegaRAID SAS 9240-4i controller for testing. > > According to the LSI documentation, this device provides the MegaRAID > interface and the BIOS message mentions MFI. The LSI driver for this device also lists support for the 9261 which I know is supported by mfi(4). Based on all this, I was hopeful that mfi(4) would work with the 9240. > > The pciconf -lv output is: > > none3@pci0:1:0:0: class=0x010400 card=0x92411000 chip=0x00731000 rev=0x03 > hdr=0x00 > vendor = 'LSI Logic / Symbios Logic' > device = 'MegaRAID SAS 9240' > class = mass storage > subclass = RAID > > I added this line to src/sys/dev/mfi/mfi_pci.c > > {0x1000, 0x0073, 0xffff, 0xffff, MFI_FLAGS_GEN2, "LSI MegaRAID SAS > 9240"}, > > It gave this result (tried with hw.mfi.msi set to 0 and to 1): > > mfi0: <LSI MegaRAID SAS 9240> port 0xdc00-0xdcff mem > 0xfe7bc000-0xfe7bffff,0xfe7c0000-0xfe7fffff irq 16 at device 0.0 on pci1 > mfi0: Using MSI > mfi0: Megaraid SAS driver Ver 3.00 > mfi0: Frame 0xffffff8000285000 timed out command 0x26C8040 > mfi0: failed to send init command > > The firmware is package 20.10.1-0077, which is the latest on the LSI website. > > Is this path likely to work out? Any suggestions on where to go from here?
You should try the updated mfi(4) driver that Doug (cc'd) is going to soon merge into HEAD. It syncs up with the mfi(4) driver on LSI's website which supports several cards that the current mfi(4) driver does not. (I'm not fully sure if the 9240 is in that group or not. Doug might know however.) -- John Baldwin _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"