On Thu, Aug 16, 2012 at 7:26 PM, Steven Hartland <kill...@multiplay.co.uk> wrote: > ----- Original Message ----- From: "George Kontostanos" > <gkontos.m...@gmail.com> >> >> >> I know. The problem with that controller is that for some reason it >> doesn't like gpart. I have gnoped the drives directly and it seems to >> be working so far. >
> It still really smells like something higher up the layers than the > controller tbh. We have tried many combinations with different drives. Any other suggestions? > >>> In addition to this we're running LSI 2008 based controllers here on >>> 8.2-RELEASE + manually merged in mps driver with ZFS just fine. They >>> aren't running 4k aligned but they are working well. >>> >> >> Right, they fall under the mps driver like the following: >> >> LSI Logic SAS2004 (4 Port SAS) >> LSI Logic SAS2008 (8 Port SAS) >> LSI Logic SAS2108 (8 Port SAS) >> LSI Logic SAS2116 (16 Port SAS) >> LSI Logic SAS2208 (8 Port SAS) > > > Confused as your 9240-4i is a SAS2008 based card so you "shouldnt" be > seeing any difference as it should be supported just fine under mps. > > The cards we have here are 9211-8i if that helps. You are right, the chip specs say: LSISAS2108 RAID-on-Chip The drives are identified as mfisyspd0, mfisyspd1, etc. > > Regards > Steve > > ================================================ > This e.mail is private and confidential between Multiplay (UK) Ltd. and the > person or entity to whom it is addressed. In the event of misdirection, the > recipient is prohibited from using, copying, printing or otherwise > disseminating it or any information contained in it. > In the event of misdirection, illegible or incomplete transmission please > telephone +44 845 868 1337 > or return the E.mail to postmas...@multiplay.co.uk. > -- George Kontostanos Aicom telecoms ltd http://www.aisecure.net _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"