----- Original Message -----
From: "Don Lewis" <truck...@freebsd.org>
To: <kill...@multiplay.co.uk>
Cc: <gkontos.m...@gmail.com>; <freebsd-stable@FreeBSD.org>;
<freebsd-hardw...@freebsd.org>
Sent: Sunday, August 19, 2012 6:37 PM
Subject: Re: LSI 9240-4i 4K alignment
On 16 Aug, Steven Hartland wrote:
----- Original Message -----
From: "George Kontostanos" <gkontos.m...@gmail.com>
You are right, the chip specs say: LSISAS2108 RAID-on-Chip
The drives are identified as mfisyspd0, mfisyspd1, etc.
The following might be interesting to you:-
http://forums.servethehome.com/showthread.php?599-LSI-RAID-Controller-and-HBA-Complete-Listing-Plus-OEM-Models
Which states:-
LSI MegaRAID SAS 9240-4i 1x4 port internal SAS vertical,
no cache, no BBU, RAID 0, 1, 10 and 5, can be crossflashed
to LSI9211 IT/IR
This is insteresting as this is the card we're using but
in the 8 port version under mps :)
I wish I would have known this earlier. I just put together a ZFS
server using LSI MegaRAID SAS 9240-8i cards. The cabling probably would
have been cleaner with the 9211-8i, but I went with the 9240 because the
vendor that I purchased the cards from listed that 9240 as being
PCI-Express 2.0, but didn't say that about the 9211. I also got the
impression that the 9240 recognized JBOD drives with the off-the-shelf
firmware, whereas the 9211 did not.
Even LSI's own site is a bit confusing. They list the 9211 in the HBA
section, but its specs don't mention JBOD, whereas the 9240 is listed in
the RAID section and its specs do list JBOD. If the only physical
difference between the cards is the connector position, it seems odd
that they don't offer products with all the combinations of firmware and
connector position.
I haven't configured the ZFS pool yet, but I didn't have any trouble
installing FreeBSD 9.1-BETA on the GPT partitioned boot drive, which
shows up as an mfi device. I'm planning on getting the ZFS pool up and
running in the next few days.
HBA's are the way to go if your using ZFS to manage the disks, you only
need RAID if your using a FS which doesn't manage the disk side well
such as UFS.
Its often quite common for RAID controllers to actually be slower
vs RAID controllers as the RAID stack can get in the way.
JBOD is generally what HBA's do by default which may be the reason
why LSI's site doesn't mention it.
Regards
Steve
================================================
This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it.
In the event of misdirection, illegible or incomplete transmission please
telephone +44 845 868 1337
or return the E.mail to postmas...@multiplay.co.uk.
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
