On Sat, 24 Nov 2012 17:44:30 +1100, Morgan Reed wrote: > On Fri, Nov 23, 2012 at 5:16 PM, Morgan Reed <morgan.s.r...@gmail.com> wrote: > > So it turns out I'd not bought bpf into the jails, however even with > > that and raw_sockets enabled I'm still having no joy with natd. > > > > I've been looking at ipfw a bit today but I've run into an issue, > > loading ipfw_nat causes my kernel to instantly panic, I need to > > recompile with KDB and DDB turned on so I can actually catch the trace > > though... Might look at netgraph before going too far down that path. > > Rebuilt the kernel with option IPFIREWALL and friends turned on > (including IPFILTER_DEFAULT_TO_ACCEPT or whatever it is).
Unless you needed to include FIREWALL_FORWARD, you really didn't need to build ipfw into the kernel, it's all loadable by module. No harm, but. > Throw ipfw_nat_load="YES" and ipdivert_load="YES" into > /boot/loader.conf so the modules are available for the jails. And with ipfw nat you won't be needing ipdivert. Again, no harm. > Run a quick and dirty ipfw script (running out of an 'up' script I > wrote into the OpenVPN config); > ipfw nat 1 config if tun0 reset same_ports deny_in > ipfw add 500 nat 1 ip from any to any via tun0 > > Works like a charm, just one last thing I'd like to get squared away > here though, currently OpenVPN is using a dynamically created tun > device, I'd like to have a static /dev/tun0 exist prior to the > /etc/rc.d/natd start launching (because as it is I have to restart > natd after the openvpn tunnel comes up), not sure what the best way to > achieve this is in a jailed environment though. If the address of the tunX interface is fixed in the jail, you can specify it by IP instead of the interface in the nat setup, like: ipfw nat 1 config ip $address same_ports deny_in ipfw add 500 nat 1 ip from any to any via $address Your use of 'reset' in nat config makes me wonder if it's a variable address though? If IP varies you will need to specify the interface. > The next trick will be migrating from my spaghetti script into rc > launched jails... cheers, Ian _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"