Hello :-) I have noticed similar behavior with one of my Toshiba DVD drives when disk was inserted, removing disk and/or drive solved the issue, but I guess it wtill exist in the driver..?
Best regards, Tomek -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info On Dec 17, 2012 11:58 AM, "Willem Jan Withagen" <w...@digiware.nl> wrote: > Hi, > > I have not noticed this before, but my system rebooted this morning and > in the following security report I found a lot of messgaes in the > dmesg-part like: > > +(probe0:arcmsr0:0:16:1): INQUIRY. CDB: 12 20 0 0 24 0 > +(probe0:arcmsr0:0:16:1): CAM status: Command timeout > +(probe0:arcmsr0:0:16:1): Retrying command > +(probe0:arcmsr0:0:16:1): INQUIRY. CDB: 12 20 0 0 24 0 > +(probe0:arcmsr0:0:16:1): CAM status: Command timeout > +(probe0:arcmsr0:0:16:1): Retrying command > > And it seems that bus 16 is: > +pass6 at arcmsr0 bus 0 scbus0 target 16 lun 0 > +pass6: <Areca RAID controller R001> Fixed Processor SCSI-0 device > > The system has been running > FreeBSD zfs.digiware.nl 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #3: Wed > Nov 14 13:25:55 CET 2012 > r...@zfs.digiware.nl:/usr/obj/usr/srcs/src9/src/sys/ZFS amd64 > for already a while. > > Anybody suggestions as to why I have these messages? > > They are during the boot sequence, so no smartd talking to the disks at > that moment. > > --WjW > > ps: dmesg, config, etc.... at: > http://www.tegenbosch28.nl/FreeBSD/Systems/ZFS > ps2: upgrading to the most recent 9.1 > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" > _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
