On Mon, Dec 17, 2012 at 9:26 AM, Willem Jan Withagen <w...@digiware.nl>wrote:
> On 2012-12-17 15:38, Steven Hartland wrote: > > Check the smart results of each disk in the array you may have a failing > > disk. > > ----- Original Message ----- From: "Willem Jan Withagen" < > w...@digiware.nl> > > To: "FreeBSD Stable Users" <freebsd-stable@freebsd.org> > > Sent: Monday, December 17, 2012 10:58 AM > > Subject: Strange CAM errors > > > > > >> Hi, > >> > >> I have not noticed this before, but my system rebooted this morning and > >> in the following security report I found a lot of messgaes in the > >> dmesg-part like: > >> > >> +(probe0:arcmsr0:0:16:1): INQUIRY. CDB: 12 20 0 0 24 0 > >> +(probe0:arcmsr0:0:16:1): CAM status: Command timeout > >> +(probe0:arcmsr0:0:16:1): Retrying command > >> +(probe0:arcmsr0:0:16:1): INQUIRY. CDB: 12 20 0 0 24 0 > >> +(probe0:arcmsr0:0:16:1): CAM status: Command timeout > >> +(probe0:arcmsr0:0:16:1): Retrying command > >> > >> And it seems that bus 16 is: > >> +pass6 at arcmsr0 bus 0 scbus0 target 16 lun 0 > >> +pass6: <Areca RAID controller R001> Fixed Processor SCSI-0 device > >> > >> The system has been running > >> FreeBSD zfs.digiware.nl 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #3: Wed > >> Nov 14 13:25:55 CET 2012 > >> r...@zfs.digiware.nl:/usr/obj/usr/srcs/src9/src/sys/ZFS amd64 > >> for already a while. > >> > >> Anybody suggestions as to why I have these messages? > >> > >> They are during the boot sequence, so no smartd talking to the disks at > >> that moment. > >> > >> --WjW > >> > >> ps: dmesg, config, etc.... at: > > >> http://www.tegenbosch28.nl/FreeBSD/Systems/ZFS > >> ps2: upgrading to the most recent 9.1 > > 'mmm, > > Smartd seems to think otherwise... > > 'camcontrol rescan all' actually delivers the same pack of errors. > > --WjW > > The timeouts are occurring on inquiry commands to non-zero LUNs. arcmsr(4) is returning CAM_SEL_TIMEOUT instead of CAM_DEV_NOT_THERE for inquiry commands to this device and LUN > 0. CAM_DEV_NOT_THERE is preferred to remove these types of warnings, and similar patches have gone into for other SCSI drivers recently. Can you try this patch? Index: sys/dev/arcmsr/arcmsr.c =================================================================== --- sys/dev/arcmsr/arcmsr.c (revision 244190) +++ sys/dev/arcmsr/arcmsr.c (working copy) @@ -2439,7 +2439,7 @@ char *buffer=pccb->csio.data_ptr; if (pccb->ccb_h.target_lun) { - pccb->ccb_h.status |= CAM_SEL_TIMEOUT; + pccb->ccb_h.status |= CAM_DEV_NOT_THERE; xpt_done(pccb); return; } _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
