I’m trying to access a Huawei USB LTE stick from a Bhyve VM like so:
# cat /var/vm/mgmt/mgmt.conf
loader="bhyveload"
cpu=1
memory=256M
network0_type="virtio-net"
network0_switch="lan"
disk0_type="virtio-blk"
disk0_name="disk0"
disk0_dev="sparse-zvol"
uuid="53854567-8358-11e8-9638-000db94be2cc"
network0_mac="58:9c:fc:04:1d:52"
bhyve_options="-lcom2,/dev/cuaU0“
On the host, I can connect ppp(8), but inside the VM, ppp(8) appears not to be
able to talk to the USB device. Using cu(1), I can talk to it just fine though.
I’m not sure how to debug this further. Is this supposed to just work, or am I
missing some obvious configuration bit?
[root@mgmt ~]# cu -l cuau1 -s 115200
Connected
ATZ
OK
ATI
Manufacturer: huawei
Model: E3272
Revision: 22.436.07.02.1202
IMEI: 867503015nnnnnn
+GCAP: +CGSM,+DS,+ES
OK
~
[EOT]
[root@mgmt ~]# ppp
Working in interactive mode
Using interface: tun0
Phase: PPP Started (interactive mode).
ppp ON mgmt> dial
Phase: bundle: Establish
Phase: deflink: closed -> opening
Phase: deflink: Connected!
Phase: deflink: opening -> dial
Chat: deflink: Dial attempt 1 of 1
ppp ON mgmt> Chat: Send: ATZ
Chat: Expect(5): OK
Chat: Expect timeout
Chat: Send: ATZ
Chat: Expect(5): OK
Chat: Expect timeout
Warning: Chat script failed
Phase: deflink: dial -> hangup
Phase: deflink: Disconnected!
Phase: deflink: Connect time: 11 secs: 0 octets in, 0 octets out
Phase: deflink: 0 packets in, 0 packets out
Phase: total 0 bytes/sec, peak 0 bytes/sec on Wed Jul 11 21:14:43 2018
Phase: deflink: hangup -> closed
Phase: bundle: Dead
ppp ON mgmt> quit
[root@mgmt ~]# cat /etc/ppp/ppp.conf
default:
enable dns
set log local LCP IPCP Phase Chat
set log all
set timeout 0
ident UMTS
set authname eplus
set authkey internet
set cd off
set device /dev/cuau1
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER \
ABORT VOICE ABORT NO\\sDIALTONE ABORT NO\\sDIAL\\sTONE ABORT ERROR \
ABORT NO\\sANSWER ABORT DELAYED TIMEOUT 5 \
\"\" ATZ OK-ATZ-OK \
AT+CFUN=1 OK \
AT+CREG? OK \
AT+COPS? OK \
AT+CSQ OK \
AT^HCSQ? OK \
AT+cgdcont=1,\\\"IP\\\",\\\"internet.eplus.de\\\" OK \
ATDT*99***1# CONNECT"
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR
Stefan
--
Stefan Bethke <s...@lassitu.de> Fon +49 151 14070811
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
