FWIW, I’ve opened a bug: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=229712
> Am 11.07.2018 um 23:41 schrieb Stefan Bethke <s...@lassitu.de>: > > It’s been a while since I last dealt with serial devices. Apparently, when > passing through a serial device on the host to a COM port in the VM, CTS/RTS > are not (correctly) passed through. With > set ctsrts off > in ppp.conf I could get ppp to dial successfully. > > > Stefan > >> Am 11.07.2018 um 19:22 schrieb Stefan Bethke <s...@lassitu.de>: >> >> I’m trying to access a Huawei USB LTE stick from a Bhyve VM like so: >> # cat /var/vm/mgmt/mgmt.conf >> loader="bhyveload" >> cpu=1 >> memory=256M >> network0_type="virtio-net" >> network0_switch="lan" >> disk0_type="virtio-blk" >> disk0_name="disk0" >> disk0_dev="sparse-zvol" >> uuid="53854567-8358-11e8-9638-000db94be2cc" >> network0_mac="58:9c:fc:04:1d:52" >> bhyve_options="-lcom2,/dev/cuaU0“ >> >> On the host, I can connect ppp(8), but inside the VM, ppp(8) appears not to >> be able to talk to the USB device. Using cu(1), I can talk to it just fine >> though. I’m not sure how to debug this further. Is this supposed to just >> work, or am I missing some obvious configuration bit? >> >> [root@mgmt ~]# cu -l cuau1 -s 115200 >> Connected >> ATZ >> OK >> ATI >> Manufacturer: huawei >> Model: E3272 >> Revision: 22.436.07.02.1202 >> IMEI: 867503015nnnnnn >> +GCAP: +CGSM,+DS,+ES >> >> OK >> ~ >> [EOT] >> [root@mgmt ~]# ppp >> Working in interactive mode >> Using interface: tun0 >> Phase: PPP Started (interactive mode). >> ppp ON mgmt> dial >> Phase: bundle: Establish >> Phase: deflink: closed -> opening >> Phase: deflink: Connected! >> Phase: deflink: opening -> dial >> Chat: deflink: Dial attempt 1 of 1 >> ppp ON mgmt> Chat: Send: ATZ >> Chat: Expect(5): OK >> Chat: Expect timeout >> Chat: Send: ATZ >> Chat: Expect(5): OK >> Chat: Expect timeout >> Warning: Chat script failed >> Phase: deflink: dial -> hangup >> Phase: deflink: Disconnected! >> Phase: deflink: Connect time: 11 secs: 0 octets in, 0 octets out >> Phase: deflink: 0 packets in, 0 packets out >> Phase: total 0 bytes/sec, peak 0 bytes/sec on Wed Jul 11 21:14:43 2018 >> Phase: deflink: hangup -> closed >> Phase: bundle: Dead >> ppp ON mgmt> quit >> [root@mgmt ~]# cat /etc/ppp/ppp.conf >> default: >> enable dns >> set log local LCP IPCP Phase Chat >> set log all >> set timeout 0 >> ident UMTS >> set authname eplus >> set authkey internet >> set cd off >> set device /dev/cuau1 >> set speed 115200 >> set dial "ABORT BUSY ABORT NO\\sCARRIER \ >> ABORT VOICE ABORT NO\\sDIALTONE ABORT NO\\sDIAL\\sTONE ABORT ERROR \ >> ABORT NO\\sANSWER ABORT DELAYED TIMEOUT 5 \ >> \"\" ATZ OK-ATZ-OK \ >> AT+CFUN=1 OK \ >> AT+CREG? OK \ >> AT+COPS? OK \ >> AT+CSQ OK \ >> AT^HCSQ? OK \ >> AT+cgdcont=1,\\\"IP\\\",\\\"internet.eplus.de\\\" OK \ >> ATDT*99***1# CONNECT" >> set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 >> add default HISADDR >> >> >> Stefan >> >> -- >> Stefan Bethke <s...@lassitu.de> Fon +49 151 14070811 >> >> >> _______________________________________________ >> freebsd-stable@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" > > -- > Stefan Bethke <s...@lassitu.de> Fon +49 151 14070811 > > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org" -- Stefan Bethke <s...@lassitu.de> Fon +49 151 14070811 _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
