I attempted to view a DVD with the ogle port (nice DVD menu
support), and I crashed my machine (4.4-STABLE, cvsup'd at
Fri Oct 19 01:08:36 EDT 2001). There was no crashdump, but the last
messages logged before the crash were:
Oct 28 17:35:38 topperwein /kernel: ata1-master: too many segments in DMA table
Oct 28 17:36:37 topperwein /kernel: ata1-master: too many segments in DMA table
What does this mean, and how do I fix it?
This is on a system with the following hardware:
AMD 1.333 GHz T-bird
Gigabyte GA-7DX mobo (AMD 761 chipset)
ATI Radeon QD ("ViVo") video board
WD Caviar IDE hard drive on ata0-master using UDMA
Hitachi GD-2000 DVD-ROM on ata1-master using WDMA2
dmesg is attached.
--
Chris BeHanna
Software Engineer (Remove "bogus" before responding.)
[EMAIL PROTECTED]
I was raised by a pack of wild corn dogs.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #1: Thu Oct 25 21:41:34 EDT 2001
[EMAIL PROTECTED]:/usr/obj.k7/usr/src/sys/TOPPERWEIN
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (1333.39-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268369920 (262080K bytes)
config> di sn0
config> di lnc0
config> di le0
config> di ie0
config> di cs0
config> q
avail memory = 256630784 (250616K bytes)
Preloaded elf kernel "kernel" at 0xc0462000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc046209c.
Preloaded elf module "splash_bmp.ko" at 0xc04620ec.
Preloaded elf module "vesa.ko" at 0xc0462190.
Preloaded splash_image_data "/boot/daemon_freebsd-1.bmp" at 0xc046222c.
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc0414262 (1000022)
VESA: ATI RADEON
Pentium Pro MTRR support enabled
md0: Malloc disk
splash_bmp: No appropriate video mode found
module_register_init: MOD_LOAD (splash_bmp, c040c7b8, 0) error 19
Using $PIR table, 10 entries at 0xc00fddb0
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1022 device=700f)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 5144 graphics accelerator> at 5.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xb400-0xb40f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 11 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
dc0: <82c169 PNIC 10/100BaseTX> port 0xd000-0xd0ff mem 0xdb000000-0xdb0000ff irq 10 at
device 12.0 on pci0
dc0: Ethernet address: 00:a0:cc:d4:0a:6d
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xdb002000-0xdb00207f
irq 5 at device 13.0 on pci0
xl0: Ethernet address: 00:10:5a:00:a9:20
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative CT5880-C> port 0xd800-0xd83f irq 11 at device 14.0 on pci0
ahc0: <Adaptec 3950B Ultra2 SCSI adapter> port 0xdc00-0xdcff mem 0xdb003000-0xdb003fff
irq 11 at device 15.0 on pci0
aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec 3950B Ultra2 SCSI adapter> port 0xe000-0xe0ff mem 0xdb004000-0xdb004fff
irq 11 at device 15.1 on pci0
aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/255 SCBs
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcc7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f flags 0x21 on isa0
ppc0: Generic chipset (NIBBLE-only) in NIBBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard OfficeJet Series 300.1.1.0> MLC,PCL,PML
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
sio1: <16550A-compatible COM port> at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
unknown: <PNP0400> can't assign resources
IP packet filtering initialized, divert enabled, rule-based forwarding enabled,
default to deny, logging limited to 10 packets/entry by default
IPv6 packet filtering initialized, logging limited to 100 packets/entry
ad0: 42934MB <WDC WD450AA-00BAA0> [87233/16/63] at ata0-master UDMA66
acd0: DVD-ROM <HITACHI GD-2000> at ata1-master using WDMA2
Waiting 10 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0a
cd0 at ahc1 bus 0 target 6 lun 0
cd0: <HP CD-Writer+ 9200 1.0c> Removable CD-ROM SCSI-4 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: / was not properly dismounted
