Mark Kane wrote:
I'm glad that it looks like running it at 100 will solve this. Thanks
for the replies. I was probably going to go through all the hassle of
getting an Asus board to replace this because I was almost certain it
was hardware, but I don't think it's worth it as long as this works :)
I guess I spoke too soon. I was running things in 100 mode all day while
doing some things to get it ready for my use. I copied 31GB of data from
one drive (ad10) to another (ad9) with no WRITE errors from what I can
see. Then I went to use cksfv to check the data against the source. This
is what I get:
ad9: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=157308607
ad9: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=157308607
ad9: FAILURE - READ_DMA status=51<READY,DSC,ERROR>
error=84<ICRC,ABORTED> LBA=157308607
ad9: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=157308639
ad9: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=157308639
ad9: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=195346815
ad9: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=195714111
ad9: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=196459199
ad9: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=197213503
ad9: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=110345151
ad9: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=110345151
ad9: FAILURE - READ_DMA status=51<READY,DSC,ERROR>
error=84<ICRC,ABORTED> LBA=110345151
ad9: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=110345183
Here are the current drives in the system:
ad0: 194481MB <Maxtor 6B200R0/BAH41BM0> [395136/16/63] at ata0-master
UDMA133
ad8: 156334MB <Maxtor 6Y160P0/YAR41BW0> [317632/16/63] at ata4-master
UDMA133
ad9: 194481MB <Maxtor 6B200P0/BAH41BM0> [395136/16/63] at ata4-slave UDMA133
ad10: 58643MB <Maxtor 6Y060L0/YAR41BW0> [119147/16/63] at ata5-master
UDMA133
(They say 133 in the dmesg but atacontrol says 100 for all of them)
Now Is this the problem that was described earlier on in the thread, or
is this crappy controllers on the motherboard and I really do need to
try to go through the hassle of exchanging it for that Asus board?
-Mark
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
