At 04:45 PM 22/08/2005, Kevin Oberman wrote:
The arguments for atacontrol have changed. The update to the man pages
was committed to current in the past day or two. I'm not sure it it has
made it to RELENG_6.
You can't just specify the channel number any more. The channel is now
the device name, e.g. "ata0".
Ahh, ok. That fixes it for the info command. I cant seem to get the
cap "magic incantation" however.
[verify1] /usr/src/sbin/atacontrol# atacontrol info ata0
Master: ad0 <ST3120026AS/3.18> Serial ATA v1.0
Slave: no device present
[verify1] /usr/src/sbin/atacontrol#
Ahh, here it is :)
[verify1] /usr/src/sbin/atacontrol# atacontrol cap ad0
Protocol Serial ATA v1.0
device model ST3120026AS
serial number 3JT1BSB2
firmware revision 3.18
cylinders 16383
heads 16
sectors/track 63
lba supported 234441648 sectors
lba48 supported 234441648 sectors
dma supported
overlap not supported
Feature Support Enable Value Vendor
write cache yes yes
read ahead yes yes
Native Command Queuing (NCQ) no - 0/0x00
Tagged Command Queuing (TCQ) no no 0/0x00
SMART yes yes
microcode download yes yes
security yes no
power management yes yes
advanced power management no no 65278/0xFEFE
automatic acoustic management no no 0/0x00 254/0xFE
[verify1] /usr/src/sbin/atacontrol#
However, I cant seem to get the smartmontools working ? Anyone using those ?
---Mike
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"