At 05:05 PM 22/08/2005, Simon L. Nielsen wrote:
On 2005.08.22 16:24:12 -0400, Mike Tancsa wrote:

> [verify1] /usr/ports/sysutils/smartmontools# smartctl -a ad0
> smartctl version 5.33 [i386-portbld-freebsd6.0] Copyright (C) 2002-4
> Bruce Allen
> Home page is http://smartmontools.sourceforge.net/

I think you have to specify full path for the device now... I ran in
to the same thing and it confused me for a bit...


Thanks, that was it!

# smartctl -a /dev/ad0
smartctl version 5.33 [i386-portbld-freebsd6.0] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST3120026AS
Serial Number:    3JT1BSB2
Firmware Version: 3.18
User Capacity:    120,034,123,776 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Mon Aug 22 17:06:21 2005 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02) Offline data collection activity
                                        was completed without error.
Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 430) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  85) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 059 057 006 Pre-fail Always - 30554783 3 Spin_Up_Time 0x0003 099 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 213765438 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 7941 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 43 194 Temperature_Celsius 0x0022 034 046 000 Old_age Always - 34 195 Hardware_ECC_Recovered 0x001a 059 057 000 Old_age Always - 30554783 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1  Short offline       Completed without error       00%      7926         -
# 2  Short offline       Completed without error       00%      7902         -
# 3  Short offline       Completed without error       00%      7879         -
# 4  Short offline       Completed without error       00%      7855         -
# 5  Short offline       Completed without error       00%      7831         -
# 6  Short offline       Completed without error       00%      7808         -
# 7  Short offline       Completed without error       00%      7785         -
# 8  Short offline       Completed without error       00%      7761         -
# 9  Short offline       Completed without error       00%      7737         -
#10  Short offline       Completed without error       00%      7714         -
#11  Short offline       Completed without error       00%      7690         -
#12  Short offline       Completed without error       00%      7667         -
#13  Short offline       Completed without error       00%      7643         -
#14  Short offline       Completed without error       00%      7620         -
#15  Short offline       Completed without error       00%      7596         -
#16  Short offline       Completed without error       00%      7572         -
#17  Short offline       Completed without error       00%      7549         -
#18  Short offline       Completed without error       00%      7525         -
#19  Short offline       Completed without error       00%      7502         -
#20  Short offline       Completed without error       00%      7479         -
#21  Short offline       Completed without error       00%      7455         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to