Hi, Kamikaze - Mine only has the following, twice for two heads. MonitorLayout was already commented out.
Section "Device" Option "BusType" "PCIE" # [<str>]4 Identifier "Card0" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "RADEON X300" BusID "PCI:1:0:0" EndSection I followed all your other suggestions, and they speeded up the non-accelerated startup quite a bit, but it still crashes _hard_ with DRI enabled. -- Don Wilde Org 01737 505-844-1126 If you don't find it in the index, look very carefully through the entire catalogue. - Sears, Roebuck, and Co. Consumer's Guide, 1897 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [LoN]Kamikaze Sent: Monday, January 30, 2006 12:52 PM To: freebsd-stable@freebsd.org Subject: Re: X.org 6.9 My X also didn't start after the update. I got it fixed though. The trouble seems to be related to improved monitor detection that conflicts with manual settings. To get my X work again I removed all entries in the section Monitor except for Identifier: Section "Monitor" Identifier "LCD" EndSection I also removed the MonitorLayout from my Device section, this was actually causing the problem I think, even though the entry was correct it seemed to cause problems with the auto detection of xorg. It now looks like this: Section "Device" Identifier "ATI Radeon 7500 Mobile" Driver "radeon" Option "BusType" "AGP" Option "AGPMode" "4" Option "AGPFastWrite" "true" Option "GartSize" "64" Option "EnablePageFlip" "true" Option "DDCMode" "true" EndSection I also cleaned up my Screen section, because X is now well capable of detecting the supported resolutions without me interfering: Section "Screen" Identifier "Screen 1" Device "ATI Radeon 7500 Mobile" Monitor "LCD" DefaultDepth 24 EndSection BTW, DRI is not broken for me and after the update glxgears performs with 37% more fps. I also noticed a performance boost in Quake 3 Arena. Stacey Roberts wrote: > Hello, > > On Mon, 30 Jan 2006, Wilde, Donald wrote: > >> Friday, I updated to latest 6-stable and did portupgrade --all >> successfully, however, I did not restart the system and X until this >> morning. The system boots to login properly, but will not startx to KDE. >> It locks up completely, cannot even ssh in from outside. Seeing the >> note in /usr/ports/UPDATING about Display Postscript, I cvsupped >> again and rebuilt world, ran portupgrade again, and cleaned x11/kde3 >> and did make && make install on it. No tasty enchiladas yet. I just >> tried running startx without startkde in .xinitrc, but still no luck. >> The X log file >> (/var/log/Xorg.0.log) never gets written. I am about to make clean >> for all X.org libraries and reinstall. >> >> What else should I be doing? > > For me on my IBM T43, updating to Xorg-6.9 broke X as well. After some > time spent hunting around for answers, I found a thread that suggested that Xorg-6.9 broke DRI (certainly for the graphics card on the T43). > > Disabling DRI in xorg.conf then enabled me to use startx successfully > thereafter., Might be worth a shot for you too. > > Regards, > > Stacey > >> -- >> Don Wilde Org 01737 505-844-1126 >> Man does not live by words alone, despite the fact that sometimes he >> has to eat them. - Adlai E. Stevenson Jr. >> >> >> >> >> _______________________________________________ >> freebsd-stable@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to "[EMAIL PROTECTED]" >> > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"