In message <[EMAIL PROTECTED]>, Vivek Khera writes : > >On Feb 27, 2006, at 12:29 PM, Ed Maste wrote: >I'm not having any luck getting my 115200 baud serial console back. >The machine was upgraded from 5.4-STABLE to 6.1-PRE last week, and >again over the weekend. I did the following: > >make buildworld and buildkernel with BOOT_COMCONSOLE_SPEED=115200 in / >etc/make.conf, options CONSPEED=115200 in the kernel config. > >make installkernel, reboot, yada yada yada, installworld,.. then >boot0cfg -B aacd0 to update the boot blocks. > >Now, at this point I expected to have a 115200 console on the next >boot. Nope. Got 9600 baud again.
There are a lot of steps to the boot process so it can be confusing - the command you wanted was disklabel, not boot0cfg. The boot0cfg program installs boot0, which is a 512-byte boot manager that you can optionally install in the MBR to give a menu of slices to boot from - it has nothing to do with reading /boot.config and doesn't set up the serial port. If the slice you boot from is aacd0s2 then you can use `disklabel -B aacd0s2' to install the new boot blocks (boot1 and boot2) into that slice. >The other side-effect is now I get this stupid "Boot F1 for DOS and >F2 for FreeBSD" menu which defaults to DOS (which is the Dell utility >partition). How do I get back to the original boot style where it >just boots freebsd without any menu? That's boot0. `fdisk -B /dev/aacd0' should put back the basic MBR. >So I updated my /boot.config to read: > > -Dh -S115200 > >now on boot, the boot0 drops to the prompt and makes me type in "/ >boot/loader" to continue the process. It is as if it forgot what >file to load, and ignores the -S option anyhow, because I still end >up with a 9600 baud console. Presumably the boot loader (boot1/2) drops you at the prompt because it is old and does not understand the "-S115200". Once you update the boot blocks with disklabel, that /boot.config should work. Ian _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
