On Thu, Apr 27, 2006 at 08:16:42PM +0400, Dmitry Morozovsky wrote: > Colleagues, > > what should I do to drift serial console from sio0 to sio4 on puc (alas, com1 > is broken on given motherboard, and there is no com2)? Quick googling and > looking through the Handbook does not help much.
look like impossible. handbook. 22.6.5.2 Using Serial Port Other Than sio0 for the Console Edit /etc/make.conf and set BOOT_COMCONSOLE_PORT to the address of the port you want to use (0x3F8, 0x2F8, 0x3E8 or 0x2E8). Only sio0 through sio3 (COM1 through COM4) can be used; multiport serial cards will not work. No interrupt setting is needed. WBR -- Dmitriy Kirhlarov OILspace, 26 Leninskaya sloboda, bld. 2, 2nd floor, 115280 Moscow, Russia P:+7 495 105 7247 ext.203 F:+7 495 105 7246 E:[EMAIL PROTECTED] OILspace - The resource enriched - www.oilspace.com _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"